Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Always wait until the blade stops completely. • Do not overload the appliance. The appliance is designed for processing relatively small quantities of materials and the maximum amounts given in the table should not be exceeded. • The appliance operates fast and effective. Do not operate continuously for more than one minute. • Do not operate after malfunction or damage of cord. • Do not attempt to repair, adjust or replace parts in the food processor. Repair the malfunctioning appliance in the nearest service center. INSTRUCTION FOR USE • As with all appliances for the preparation of foodstuffs, it is advisable to clean those parts, which come into contact with food before using for the first time. CHOPPING The appliance is universal, there is a possibility of cooking in a bowl with closed lid and for uninterrupted cooking through upper tray. • Place the motor unit on a level surface. • Align the rib under the container with the corresponding slot on the motor unit. Turn gently until it locks in position. • Place the cutting knife on the drive spindle. • Load the products for chopping in the container. • Put the container lid and turn it in an anticlockwise direction until it reaches the stop. • Insert plug into the power supply. The appliance will not operate until the container lid is firmly in the correct position. • Press the Pulse button to start chopping. The appliance will run as long as the key is kept depressed. CAUTION: Depend on the majority of foodstuffs, it is advisable to depress the Pulse button momentarily a few times in succession and then to continue operating until the required degree of fineness has been achieved. Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute. GRATING / SLICING OF THE FOOD • Place the motor unit on a level surface. • Align the rib under the container with the corresponding slot on the motor unit. Turn gently until it locks in position. • Place the grating/slicing disks on the drive spindle thus the blade side should be upwards. • Put the container lid and turn it in an anticlockwise direction until it reaches the stop. • Cut the potatoes, carrots, cucumber etc, into pieces and place the ingredients into the feed chute of the bowl lid. Use the pusher to push food down the feed chute. Never use your fingers or other utensils. • Insert plug into the power supply. The appliance will not operate until the container lid is firmly in the correct position. • Press the Pulse button to start grating or slicing. The appliance will run as long as the key is kept depressed. WHISK STICK • Place the motor unit on a level surface. • Align the rib under the container with the corresponding slot on the motor unit. Turn gently until it locks in position. • Place the whisk for mixing and shaking on the drive spindle. • Load the products for chopping in the container. • Put the container lid and turn it in an anticlockwise direction until it reaches the stop. • Insert plug into the power supply. The appliance will not operate until the container lid is firmly in the correct position. • Press the Pulse button to start mixing or shaking. The appliance will run as long as the key is kept depressed. CAUTION: Never use the whisk for mixing and shaking to knead heavy dough. PREPARING THE INGREDIENTS USING THE CUTTING KNIFE OR GRATING / SLICING DISK Type of food Preparation Max amount at one time Time approximate Meat Remove skin and sinew, cut into 1 cm pieces 100 g 10-20 sec. Fish Remove bones and skin, cut into 2 cm cubes 150 g 10-20 sec. Onions Peel and cut into 2-3 cm pieces 100 g 7 short bursts Garlic Peel 5 cloves 5 sec. Apple (raw) Peel, remove cores and cut into 2 cm pieces 150 g 10-15 sec. Carrots Peel and cut into 2 cm pieces 150 g 10-15 sec. Cabbage Remove the core and cut into 2 cm pieces 100 g 5 sec. Peanuts Remove the skin 100 g 60 sec. Bread Cut into 2 cm pieces 1 piece 15 sec. • To avoid damage of blade, do not process, crush or grind hard items such as frozen foods, ice, cereals, rice, spices and coffee. USING THE WHISK FOR MIXING AND SHAKING Type of food Preparation Max amount at one time Time approximate Mayonnaise Mix the egg yolk and vinegar for 10 sec. and then add the oil through the lid opening whilst the appliance is running 2 egg yolk 1 tablespoon vinegar 125 ml oil 60 sec. CARE AND CLEANING • Unplug the appliance from the power supply. • Clean the appliance after each usage. • Wash the cutting knife, grating/slicing disks and whisk stick with warm soapy water and dry them. • Do not use aggressive and abrasive agents. • Wipe the outside of the motor unit with a damp cloth. CAUTION: The blades are sharp and therefore dangerous. Handle with caution. STORAGE • Ensure the power is turned off while the food processor is not in use. • Store the appliance in a cool, dry place. SPECIFICATION Power supply 110-240 V Power 400 W Net/Gross Weight 2.3 kg /...