Assessments - , GPA:
(
)
)
Fabricante : Hobart
Arquivo Tamanho: 125.85 kb
Arquivo Nome : 7bafb70c-b3fb-1454-b9ec-716f90dd5024.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
Models FP61 and FP62 are equipped with a 6-quart bowl. Models FP41 and FP61 are single speed; Model FP62 has a high and low speed. All models have a separate pulse function. Standard equipment includes one cut/mix knife, a spatula, and a bowl scraper with turnable splash guard. Optional equipment includes a whip knife, and additional bowls and knives. Also available as an option is a 4quart bowl adapter kit for Models FP61 and FP62. The adapter kit includes a 4-quart bowl, adapter ring, cut knife, bowl cover and bowl scraper. INSTALLATION UNPACKING Immediately after unpacking the food processor, check for possible shipping damage. If the food processor is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installation, verify that the electrical service agrees with the specifications on the data plate located on the back of the machine. Do not lift the food processor by the arm; lift only with the carrying handles located on either side. LOCATION Your food processor should be operated on a suitable counter height surface. ELECTRICAL CONNECTIONS WARNING: THE POWER SUPPLY CORD ON THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG (4-PRONG GROUNDING PLUG ON MODEL FP62). THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. Rated voltage of Models FP41 and FP61 is 115/60/1; rated voltage of Model FP62 is 240/60/3. – 3 – SETTING UP 1. Lift the arm up and then rotate it as far back as it will go. 2. Place the bowl on the machine so that the locating pins of the bowl are inserted into the grooves in the bowl recess on top of the machine, push bowl all the way down to the base and rotate counterclockwise slightly to lock in position. 3. Place the cut knife (or optional whip knife) on the drive shaft at the center of the bowl and make sure that the knife drops all the way down to the bottom of the bowl. 4. Place the scraper in the bowl with its splash guard positioned at 6 o'clock. 5. Place the bowl cover on the bowl with the arrow on the bowl cover pointing toward the handle of the scraper, and press the bowl cover down gently until the scraper and bowl cover snap together. 6. Lift the arm, and at the same time, swing it over the bowl cover. Lower the arm over the center of the bowl cover to secure it in position. The machine will not operate unless the bowl and bowl cover are correctly positioned and the arm is in position above the center of the bowl cover. CHECK MACHINE Once the machine is set up, check to ensure that: 1. Cutting blades stop turning within 4 seconds when the arm is swung back away from the center of the bowl cover. 2. The machine cannot be started with the bowl and bowl cover removed but with the arm swung into position above the center of the drive shaft. If either of these conditions occur, contact your local Hobart Service Office. INSTALLING 4-QUART ADAPTER KIT ON MODELS FP61 OR FP62 1. Remove the 6-quart bowl from the machine (see REMOVING BOWL in this manual). 2. Fit 4-quart adapter ring into the bowl recess on top of the machine and rotate adapter ring counterclockwise to lock in place. 3. Place 4-quart bowl on the machine inside the adapter ring. Place bowl so that the locating pins of the bowl are inserted into the grooves in the bowl recess inside the adapter ring. Push bowl all the way down to the base and rotate counterclockwise slightly to lock in position. 4. Place the 4-quart cut knife on the drive shaft at the center of the bowl and make sure that the knife drops all the way down to the bottom of the bowl. 5. Place the 4-quart scraper in the bowl with its splash guard positioned at 6 o'clock. 6. Place the 4-quart bowl cover on the bowl with the arrow on the bowl cover pointing toward the handle of the scraper. Press the bowl cover down gently until the scraper and bowl cover snap together. 7. Lift the arm, and at the same time, swing it over the bowl cover. Lower the arm over the center of the bowl cover to secure it in position. – 4 – OPERATION WARNING: ROTATING KNIVES INSIDE MACHINE. KEEP HANDS OUT. BEFORE FIRST USE Before using for the first time, wash all removable parts of the food processor in warm soapy water. The cutting blade is very sharp; be very careful when cleaning the cutting blade. Rinse thoroughly and wipe dry with a soft clean cloth. INDICATOR KNOB — MODELS FP41 AND FP61 (Fig. 1) The indicator knob for Models FP41 and FP61 has three positions: • OFF — machine is switched off. • ON — machine runs continuously. • PULSE — machine runs until the indicator knob is released. Use the PULSE setting for short processing tasks in which a precise result is required. O ESUP FFOL N PL-51246-1 Fig. 1 INDICATOR KNOB — MODEL FP62 (Fig. 2) The indicator knob for Model FP62 has four positions: • OFF — machine is switched off. • LOW SPEED — machine runs continuously at low speed. • HIGH SPEED — machine runs continuously at hi...