Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
A scraper may be used but must be used only when the food processor is not running. 12. Blades are sharp. Handle carefully. When handling the chopper blade (C) always hold it by the plastic hub. 13. To reduce the risk of injury, never place cutting blades or discs on the base without first putting bowl properly in place. 14. Be certain cover is securely locked in place before operating appliance. 15. Never feed food by hand. Always use food pusher. 16. Do not attempt to by-pass the cover interlock mechanism. 17. Always operate blender with the cover in place. 18. When blending hot liquids, remove center piece of two-piece cover. IMPORTANT NOTICE This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY REV. 09/02C Congratulations! As the owner of a new Food Processing Center, you are about to use a very versatile and powerful kitchen appliance that will quickly become an indispensable item in your kitchen. Euro-Pro products are engineered to meet the highest quality standards and are designed to offer the ultimate in ease of operation and convenience. IMPORTANT INFORMATION Please read all the following instructions carefully. IMPORTANT For your protection, this appliance has a double safety switch so that it cannot run unless the food processor lid (13) is locked in place and either the safety cover (2) or the blender (8) is also locked in place. PLEASE NOTE A. To remove safety cover (2) or blender (8), you must first remove the processor lid (13). B. To operate the food processor, the safety cover (2) must be properly locked in place. C. To operate the blender (8), processor lid (13) must be locked in place. D. When operating blender (8) make sure that all attachments are first removed from the food processor bowl (11). E. Do not attempt to use both blender and food processor at the same time. F. Do not attempt to by-pass the cover (2) safety interlock mechanism or the main lid interlock. To remove the WARNING: blender, you must Always remove first unlock and the blender and fit remove the the safety cover processor lid (A). (2) into the Then unlock and processor body remove the when using the blender (B) by processor. twisting clockwise. IMPORTANT: Remove protective blade cover(s) before use. Protective blade covers to only be used for storage. 1 Food Processing Center 120V., 60 Hz., 600 Watts MAIN COMPONENTS AND ACCESSORIES 1. Processor Body 12. Spindle 24. Chopping Blade 2. Safety Cover 13. Processor Lid Protective Cover 3. Safety Cover/Blender 14. Food Pusher 25. Plastic Dough BladeLocation 15. Storage Dome 26. Whisk Head 4. On/Off Speed Control Dial 16. Spatula 27. Whisk Beater 5. Pulse Button 17. Blade Holder 28. Juice Extractor/Filter 6. Drive Shaft 18. Fine Shredding Blade 29. Juice Extractor Lid 7. Storage Compartment 19. Coarse Shredding Blade 30. Juice Extractor Pusher 8. Blender 20. Coarse Slicing Blade 31. Citrus Juice Filter 9. Blender Lid 21. Fine Slicing Blade 32. Juice Reamer 10. Measuring Cap 22. French Fry Blade 11. Processor Bowl 23. Chopping Blade 2 STORAGE The food processing center is designed so that most of the attachments can be stored on-board. Storage Compartment 1. Lift the lid of the storage compartment (7). 2. Place whisk head (26) in storage compartment as shown. 3. Place the protective cover (24) onto the chopping blade (23) and place into storage compartment. The highest part of the blade should be placed at the back of the compartment. 4. Push shaft of whisk beater (27) firmly into the hole. 5. Close the lid of the storage compartment. Storage Dome 1. Fit the processor bowl (11) & processor lid (13) onto the processor base. 2. Place the the storage dome (15) onto the processor lid. 3. Add the spindle (12) into the circular hole in the storage dome. 4. Place the plastic blade holder (17) & French fry blade(22) into the two longer slots. 5. Add the slicing blades (20, 21) & the shredding blades (18, 19) into their slots in the storage dome. Spatula Storage Slide the spatula (16) into the slot provided on the side of the processor body (1). Cord Storage The power supply cord can be stored by feeding it into the opening at the back of the food processor body. 3 INSTRUCTIONS FOR USE Operating Controls The processor and blender control dials have settings as follows: Off/1-9 + Max Pulse The speed can be adjusted while the processor or blender is in use. Using the pulse button (5) allows greater control over the texture of the food processed. It is only intended to be used for short “bursts” of processing or blending. Operating the Food Processor Setting up 1. CAUTION: Make sure that the unit is unplugged from power source and operation button is on “OFF” before inserti...