Roebuck and Co, Holfman Estates, IL 60179 When using electrical appliances, basic safety precautions should always be followed, Including the folJowtng: 1 Read al! instructions,, 2 To protect agafnsl risk of eleclrica_ chock do not put Food Processor in water or other liquid 3 Close supervision is necessary when any appliance ts used by or near children, 4 UNPLUG from outlet when not in use, before putting on or taking off parts, and before cleaning 5 AVOID contact with moving parts 6 DO NOT ops

This gas grill is intended for outdoor use only and is not intended to be installed in or on recreational vehicles or boats. Note to Installer: Leave this Owner's Manual with the consumer after delivery and/or installation. Note to Consumer: Leave this Owner's Manual in a convenient place for future reference. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. P80106054A -Date: 2003/10/28 /_kWARNING Warranty ..................................................... 2 Combustion byproducts prod

Sears, Roebuck and Co, Hoffman Estates, IL 60179 When using eleclrlca! appliances, basic safety precautions should always be followed, Including the following: I Read allinstructions. 2-To prolecl against risk of e[eclrical shock do not put Food Processor in water or other liquid. 3 Close supervision is necessary when any appliance is used by or near children. 4 UNPLUG from outlet when not in use, before putting on or taking elf parts, and before cleaning 5. AVOID contact with moving paris 6 DO

Your replacement unit is covered by our one year full warranty. Please follow these instructions to receive this quality service. If you reside in the United States and your KitchenAid® food processor should fail within the first year of ownership, simply call our toll-free Customer Satisfaction Center at 1-800-541-6390, 8 a.m. to 8 p.m., Monday through Friday, 9 a.m. to 3 p.m., Saturday, Eastern Time. Give the consultant your complete shipping address. (no P.O. box numbers, please), along with

Whenever possible, rinse parts immediately after processing for easy cleanup 3 Wipe the Base. Contro_ Knob, and feet with a damp cloth and dry thoroughly Stubborn spols can be removed by rubbing with a damp clolh and a mild, non-abrasive cleaner DO NOT immerse the Base in liquid 4. AII removable parts can be washed by hand or in a disl_washer in the tap rack Do not put In or near lhe utensil baskeL 5 tf washing removable parts by hand, wash in hot, sudsy water, rinse and dry thoroughly 6 If nece

_ Fig, 4 1 Lock the Bowl onlo the Base as described inAssembly 2 Place the Chopping Blade onto the Center Post (see Fig. 4) CAUTJO N; Blades are sharp, Handte carefully, 1 3 Piece food to be chopped into Bowl Refer to Food Gutde to prepare food for chopping 4 Lock Bowf Cover Assembly onto Bowl, as described in Assembly 5 Lock the Food Pusher into the Movable Loop by totaling counterclockwise until the food pusher's tab is under slot in the movabte loop's tid, then lock feed chule tid irttothe sp

Correction: Check for proper position of the Electrode Tip as shown in Figures 8e and 10. The gap between the Spark Electrode Tip and Burner or Spark Receiver should be approximately 3/16", adjust if necessary. With the gas supply closed and all Control Knobs set to OFF press the Electric Ignitor Cap and check for the presence of a spark at the Electrode. • Disconnected Ignition Wires Correction: Inspect the Ignitor Junction Box found behind the Control Panel. Connect loose Ignitor wires to Junc