Assessments - 3, GPA: 4
(
)
)
|
Fotos e especificações Fellowes Helios 60 |
Facilidade de uso
Lea estas instrucciones antes de usar la maquina. F E S Performance Thermal Binder Helios 60TM Please read these instructions before use. Lire ces instructions avant utilisation. Lea estas instrucciones antes de usar la maquina. F E S INDEX LAMINATOR CONTROLS / QUICK START GUIDE 3 ENGLISH 4-7 FRANCAIS 8-11 ESPANOL 12-15 3 B E F D BINDING MACHINE CONTROLS QUICK START GUIDE M H / K I 1 A O J N L C G 2 3 4 5 6 7 8 9 10 11 12 ENGGLLISHH EE CAPABILITIES Performance Entry width 12” Binding capacity (max) 1.2” / 600 sheets (20lb) Estimated heat-up time 4 minutes Cool down time 30-60 minutes Binding cycles 1-10 cycles / 1-3 minutes Ready indication Light & beeps LED interface Yes Auto-Sense Yes Heat-Shield Yes Power Save / Auto shut-off Yes (30 mins) Multiple Document Binding Yes IMPORTANT SAFETY INSTRUCTIONS Technical Data Voltage / Frequency / Current(Amps) 110-120V AC, 60Hz, 5.5A Wattage 600 W Dimensions (HxWxD) 20.9” x 9.4” x 3.9” Net weight 5.7 lb Binding capacity The maximum sheet capacity can be a single (up to 500 sheet max) or multiple documents up to approximately 600 sheets max. Eg: 1 x 500 sheets = 500 max 3 x180 sheets = 540 max 6 x 60 sheets = 360 max 8 x 30 sheets = 240 max 2 x 300 sheets = 600 max CAUTION: Please read before use and keep for future reference. When binding; - plug the machine into an easily accessible socket. - to prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket. DO ensure the machine is on a stable surface. DO test scrap sheets and set the machine before use. DO remove staples and other metal articles prior to binding. DO keep the machine away from heat and water sources. DO turn off the machine after each use. DO unplug the machine when not in use for an extended period. DO use binding covers designed for use at the appropriate settings. DO keep away from pets, while in use. DO NOT leave the power cord in contact with hot surfaces. DO NOT leave power cord hanging from cupboards or shelves. STORAGE & CLEANING Unplug the machine at the wall. Allow the machine to cool. DO NOT use appliance if the power cord is damaged. DO NOT attempt to open or otherwise repair the machine. DO NOT exceed the machines quoted performance. DO NOT allow children to use this machine without adult supervision. DO NOT bind sharp or metal objects (eg: staples, paper clips). DO NOT bind heat-sensitive documents (eg: tickets, ultra- sounds etc). DO NOT touch the heating plate while binding - it is very hot. The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. BINDING MACHINE CONTROLS A On/off switch (rear side) I Lid lock (2) B Power On button & LED J Binding channel C Binding thickness guide K Document support D Timer selection (increase) L Illuminated user interface E Timer selection (decrease) M Cooling vents F Select / OK button N Document clamp (binding) G Thickness setting / timer selection O Cooling rack H Lid FEATURES & TIPS ‘System-Check’ function When switched on, the machine performs a ‘System-Check’ function. The control panel illuminates LED neons in sequence to check their operation. ‘Thermo Sense’ function When opening the document clamp and loading documents for binding, the machine calculates the optimum binding cycle period. There is no need to manually input the cycle period. ‘Heat-Shield’ function The document clamp operates as a ‘Heat Shield’ to prevent operators from accidentally touching the heating plate. ‘Auto-Off’ function If the machine is not active for 30 minutes, the ‘Auto-Off’ function will place the machine into standby mode. The ’Power-On’ LED will flash red and green. To operate the machine, press the ‘Power-On’ button. • Always put the document into the appropriate sized binding cover. • For better results, consider including blank sheets to fill the thermal cover to capacity. • Always test bind with a similar size and thickness of thermal covers before final process. • Helios has an angled heater mechanism to ensure correct document alignment with the document support during the binding process. • For best results, use Fellowes® brand supplies. • Thermal binding covers work best with thin and uncoated types of paper. Care should be taken with thick and coated papers to ensure satisfactory results. • If the sheets have not been glued completely to the cover, the document can be re-processed to improve the result. • Ensure the sheets are well aligned and touching the glued spine of the thermal cover by tapping the collated document in the cover onto a flat surface. This can be done before and after the binding process. BEFORE BINDING 1. Ensure the machine is on a stable surface. Check there is enough clear space around the machine to operate safely. 2. Insert the power lead into the power socket (located at the rear of the machine). HOW TO BIND 5. Switch the power on (located at the rear side). 6. The ‘Power-On’ button wi...