Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Neckties) away from rollers.The rollers have pinch points that can trap body parts or clothing and cause serious injury. 4. Keep flammable and wet objects away from the machine. 5. Place machine on a level surface. 6. Avoid excessive sunlight, humidity and extreme temperatures. 7. Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing. 8. Keep out of reach of children. 9. Only Royal Sovereign authorized maintenance and service technicians should make repairs. 10. Do not attempt to laminate items that exceed total recommended material thickness for the unit 11. When cleaning the machine, don't use flammable sprays or materials. 12. Do not touch the rollers when they are hot or place foreign objects inside the machine. 13. Do not cover the surface of the machine until the machine has completely cooled. 2 ¿RSËfidon 3. INSTALLATION Note: The laminator should be installed by a trained service technician. The laminator comes fully assembled, except for the feed table and paper guide to avoid shipping damage. Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damage is reported and a claim is filed with the delivering carrier immediately upon receipt. The laminator should be located in an area with adequate work space for feeding graphics and lamination materials. Avoid placing the laminator in a dusty area or near sources of extreme heat or cold. Once the laminator is in place, lock the casters into position(“ON” position). Always unlock the casters (“OFF” position) when moving to a different location. ELECTRICAL REQUIREMENTS Royal Sovereign recommends that a licensed electrician ensures proper power installation to your laminator in accordance with electrical codes in your area. The laminator should have a dedicated power line. MODEL RSC-1400C RSC-1 400H 220-240V 120V 220-240V 120V Power Supply 50/60HZ 50/60HZ 50/60HZ 50/60HZ single phase 120V UL 230V UL 'ifc*- 240V UK 220V EU 220V AU 3 RSC-1400C/H 4. INCLUDED WITH LAMINATOR Thoroughly inspect the parts and the unit. It is imperative that any missing parts are reported and a claim is filed with the reseller immediately upon receipt of shipment. Part Name Quantity Picture Laminator 1 Owner's Manual 1 3" (76mm)/2" (57mm) Auto Grip 6/4 Registration Card 1 Z*r7 L-wrench (2.5) 1 Dust Cover 1 Spare Motor Fuse - FUSE(50T) (6.3A) 1 CT (T) Spare Main Power Fuse - FUSE(65TS) (5A) 1 a (T) 8 - 1/4"Hexa head Bolt (M6 *20mm) 8 - Spring Washer( <^6.1) (Included with option only) 10/10 12 - 3/16"screw (M5 * 10mm). 12 - Spring Washer( 0 5.1) (Included with option only) 12/12 Front Feeder and Rear Rewinder Kit (Included with option only) 2/2 r 1% 4 - 1/3"Hexa head Bolt (M8 * 70mm) 4 - Spring Washer( 08.5) (Included with option only) 4 % 4 - 1/3"screw (M8 » 60mm). 4 - Spring Washer( 08.5) (Included with option only) 4 % NUT (M8) 4 © 4 ¿RS£ä*gn 5. PRODUCT IDENTIFICATION 2 1 3 4 5 6 12 11 10 9 8 13 NO. PART NAME RSC-1400C RSC-1400H 1 SAFETY COVER o o 2 EMERGENCY SWITCH o o 3 FRAME-PAPER GUIDE o o 4 FEED TABLE o o 5 MAIN ROLLER o o 6 ASSEMBLY STAND o o 7 FOOT PEDAL o o 8 TENSION CONTROL KNOBS o o 9 PRESSURE LEVER o o 10 CONTROL PANEL o o 11 UPPER IDLE BAR o o 12 RELEASE LINER TAKE UP o o 13 REMOTE CONTROL o o 5 RSC -1400C/H 6. CONTROL PANEL When the machine is initially turned on, the LED display window will show the speed and temperature set at 1. (RSC-1400C and RSC-1400H). RSC-1400H RSC-1400C Control Buttons 1. TEMPERATURE DISPLAY: Display’s current temperature (RSC-1400C and RSC-1400H) 2. SPEED DISPLAY: Display’s current Speed. 3. TEMPERATURE BUTTON- (RSC-1400C and RSC-1400H): To change the temperature (max. RSC-1400H: 122°F, 50°C) of the upper roller, press up or down arrow button. 4. SPEED BUTTON: Adjusting the speed of the rollers. To change the speed of the rollers, press the up or down arrow button. 5. RUN: To start the rollers. 6. STOP: To stop the rollers. 7. REV: To reverse the rollers, press and hold the REVERSE button. 6 ¿RSËfidon 7. SPEED AND TEMPERATURE SETTINGS RSC-1400C/H Speed# Speed(Ft/min,M/min) 1 4(1.2) 2 6(1.7) 3 7(2.2) 4 9(2.6) 5 10(3.1) 6 12(3.6) 7 14(4.2) 8 15(4.5) 9 16(5.0) RSC-1400H Temp.# Temperature! °F,° C ) 1 No Heating 2 No Heating 3 91 (33) 4 97(36) 5 104(40) 6 111(44) 7 1 15(46) 8 1 17(47) 9 124(51) 8. ROLLER NIP SETTING It is important to adjust the roller nip settings to the appropriate thickness of the board being used. Use the guide below to adjust to the correct position. NO. Inches Metric (mm) 1 Lamination Lamination 2 1/25" 1 3 3/16"~1/4" 5-7 4 3/ 8"~1/2" 10-13 5 3/5" 15 NOTE: If vou don't want to laminate.please place the pressure lever to the "Open positionfNQ.5Y'. 7 RSC-1400C/H 9. USING FOOT PEDAL AND REMOTE CONTROL USING FOOT PEDAL Place the foot pedal on the floor in front of the machine. Once all correct settin...
Este manual também é adequado para os modelos :Laminador - RSC-1400C (574.74 kb)