Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
5. Insert the carrier and its contents straight into the machine, leading with the folded edge. handle carriers carefully so that they can be reused. REV Selecting Functions} } Control Panel LCD 13 Pro Operating Instructions PRE/H Stand-by 6 The laminated item will automatically exit the rear of the pouch laminator. After the pouch has stopped moving, place the carrier on a flat surface to cool briefly before removing the finished pouch. 7. If the laminated product looks hazy, then the temperature may need to be increased or the speed decreased. If the laminated product looks wavy, then the temperature may need to be decreased or the speed increased. 8. Select PRE/H to keep the machine on stand-by at 80°C (176° F). 9. If finished laminating, press the “COLD” key. Temperature 0 and Speed 2 will be displayed. When the temperature reaches 85° C (186° F) the rollers will stop automatically. Cooling down the machine before turning off the power switch protects and extends the life of the rollers. 10.Turn off the power switch. 11. Unplug the power cord if the machine will not be used for a long period of time. OPERATION, COLD LAMINATION After the laminator has been turned on using the power switch located on the back of the machine, the Cold mode is automatically set. “Ready,” temperature setting “0” and speed setting “0” should be displayed on the LCD. If the machine has just recently been used for Hot Lamination, then the machine must reach a temperature of no hotter than 30° C (86° F) before starting Cold Lamination. 1. Select a GBC No-Heat Laminate that is slightly larger than the document to be laminated. 2. Run the film, film-side faced up, for about 3-6mm (1/8 - 1/4”) into the laminator, and then press STOP to stop the rollers. 3. Carefully separate the backing release paper from the film, and drape the clear film over the top of the laminator. 4. Place the document between the separated film and backing, and select Speed 1. 5. After the laminated document exits the rear of the laminator, then either cut off the excess pouch edge for a flush-cut appearance, or leave the edge as an adhesive border for signage. backing release paper Cold Lamination Cold Lamination with GBC No-Heat Laminate™ GBC Creative Foils™ OTHER APPLICATIONS GBC CREATIVE FOILS™ 1. Select 150° C (302° F) and speed 3, and wait for the READY indicator. 2. Place GBC Creative Foil color-side-out over output from a toner-based laser printer or photocopier. When printing various colors on the same original piece, arrange the different colors and secure with the stickers included with the Creative Foils. 3. Insert the document and foil into a carrier and laminate. 4. When the item exits the rear of the laminator, then remove the document from the carrier and remove the excess foil. GBC SOFT TOUCH POUCHES™ 1. Select 130° C (266° F) and speed 3, and wait for the READY indicator. 2. Start laminating. 3. When the pouch exits the rear of the laminator, carefully rub a finger against a front corner to remove the protective carrier film. GBC Soft Touch Pouches™ document film draped over laminator RELATIFS A LA SECURITE. MERCI DE LES LIRE TRES ATTENTIVEMENT. CE SYMBOLE “ATTENTION SECURITE” PRECEDE, DANS CE MANUEL D'UTILISATION, CHAQUE MESSAGE CONCERNANT LA SECURITE. CE SYMBOLE INDIQUE UN RISQUE POTENTIEL DE BLESSURE POUR VOUS OU D'AUTRES PERSONNES, OU UN RISQUE DE DOMMAGE POUR LA MACHINE OU VOS BIENS PERSONNELS. L’AVERTISSEMENT SUIVANT EST NOTIFIE SUR LA PARTIE INFERIEURE DE L’APPAREIL. INSTRUCTIONS CONCERNANT LA SECURITE VOTRE SECURITE, COMME CELLE DES AUTRES, EST IMPORTANTE POUR NOUS. CES INSTRUCTIONS CONTIENNENT D'IMPORTANTS MESSAGES ATTENTION Risque de secousse electrique. Ne pas ouvrir. Aucune piece reparable par l'utilisateur. Entretien par personnel qualifie. Ce message signifie que vous pourriez etre tres serieusement blesse si vous tentiez d’ouvrir l'appareil en vous exposant ainsi a un risque de choc electrique. INSTRUCTIONS CONCERNANT LA SECURITE ATTENTION: PAR MESURE DE SECURITE, NE BRANCHEZ PAS LA PLASTIFIEUSE A POCHETTES AVANT D'AVOIR LU EN TOTALITE CES INSTRUCTIONS. CONSERVEZ LES DANS UN ENDROIT APPROPRIE AFIN DE POUVOIR VOUS Y REFERER SI NECESSAIRE. AFIN Manuel d’Utilisation D'EVITER TOUTE BLESSURE, LES PRECAUTIONS DE BASE SUIVANTES DOIVENT ETRE OBSERVEES A L'INSTALLATION ET LORS DE L'UTILISATION DE CET APPAREIL. MESURES DE SECURITE GENERALES • N’utilisez la plastifieuse a pochettes que pour la plastification de documents en vous conformant aux specifications indiquees. • N’introduisez pas dans la fente d'alimentation de la machine autre chose que des transporteurs, des pochettes et des documents. • Installez la machine en securite sur un emplacement stable pour eviter qu’elle ne tombe; cela pourrait l'endommager et causer d'eventuelles blessures corporelles aux utilisateurs. Manuel d’Utilisation 13 Pro • Coupez l’alimentation si vous n'utilisez pas l'appareil. • Conformez-vous aux avertissements et aux instructions mentionnes sur l’appa...