Assessments - 4, GPA: 3.8
(
)
)
|
Fotos e especificações Royal Sovereign ES-410 |
Facilidade de uso
Click the Customer Support Tab then Registration Tab. Pagina en Espanol 9 Page en Francais 17 Royal Sovereign International, Inc. LAMINATOR ES-410 SAFETY INSTRUCTIONS The safety recommendations outlined in this section should be read and understood before operating this machine. When using this machine follow these basic safety precautions to reduce risk of fire, electric shock or injury. Keep this information for future reference. 1. To prevent the possibility of a fire or injury, do not allow foreign articles inside the machine. 2. Do not attempt to laminate items that exceed total recommended material thickness. 3. Do not insert pouch film with the back end first. (Front of film: sealed side, Back of film: open side.) This may cause the pouch to jam the rollers. 4. To prevent the possibility of electric shock, do not immerse the laminator in water or permit liquids inside the machine. 5. Because the laminator creates heat, keep out of the reach of children. 6. Do not cut pouches before inserting them into the laminator. This will cause the laminator to jam. 7. Do not laminate leaves, flower, clothes etc. 8. If the room temperature is low (under 64.F), the ready light may take longer to come on. 9. When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire, or damage to the machine. 10. Do not use the machine if the cord is damaged. This may result in electric shock, fire, or other hazards. 11. Do not place objects on the power cord and do not bend it excessively. This may result in electric shock, fire or other hazards. 12. When not using the machine for long periods of time, unplug the power cord from the outlet. 3 CONTENTS Box Contents•••••••••••••••••••••••••••••••••••• 5 Parts•••••••••••••••••••••••••••••••••••••••••••• 5 Controls••••••••••••••••••••••••••••••••••••••••• 5 Features••••••••••••••••••••••••••••••••••••••••• 5 Operation••••••••••••••••••••••••••••••••••••••• 6 Troubleshooting••••••••••••••••••••••••••••••••• 7 Specifications••••••••••••••••••••••••••••••••••• 7 Warranty•••••••••••••••••••••••••••••••••••••••• 8 Contact Information••••••••••••••••••••••••••••• 8 Pagina en Espanol••••••••••••••••••••••••••••••• 9 Page en Francais•••••••••••••••••••••••••••••• 17 4 ight m ight m ES-410 BOX CONTENTS Laminator and pouch fil PARTS Control switch Ready l Front opening CONTROLS Cold Lamination Hot lamination FEATURES Hot and Cold Lamination By simply flipping the control switch, this machine can be adjusted to handle hot and cold lamination pouch film. Accepts pouches 3-5 mil thick. Ready Light A blue ready light clearly indicates when the machine has reached optimal temperature and is ready to laminate. Portability This lightweight laminator is easily maneuverable from home to office and small enough to be stored on a tabletop. Power off 5 OPERATION Hot Lamination 1. Place the machine on a flat, sturdy surface. 2. Turn the control switch to the hot position . The machine will take approximately 8 minutes to warm-up. When the proper temperature is reached, the ready light will glow steady. 3. Place the item to be laminated into the laminating pouch. 4. Insert the pouch film into the front opening of the laminator. Make sure to place the sealed end of the pouch film in first. 5. The document or photo will then automatically feed out the through the back of the machine. NOTE: Laminated items exiting the machine may be too hot to touch. 6. If the item is not completely laminated, repeat steps 4-5. NOTE: Laminated items will be hot and will easily bend. To keep the item flat, place on a flat surface and allow it to cool. Before laminating important or unique documents, always test a pouch through the laminator using a similar document. Cold Lamination 1. Place the machine on a flat, sturdy surface. 2. Turn the control switch to the cold position . If the machine was previously used in hot mode, allow approximately 25 minutes to cool down. When the proper temperature is reached, the ready light will glow steady. 3. Place the document to be laminated on the adhesive side of the cold film with the document face down, sealed end first. 4. Insert the document to be laminated into the front opening of the machine. 5. Remove paper liner from the cold film slowly while the document is being inserted into the machine. 6 ES-410 TROUBLESHOOTINg Symptom Solution Motor does not work. Check to make sure machine is plugged in. Check to make sure the control switch is turned to hot or cold. Pouches are not laminating correctly. Make sure that the machine is set to the hot setting. If you are still having complications, please contact Royal Sovereign’s Service Center at 1-800-397-1025. SPECIFICATIONS Model ES-410 Dimensions 8.9 x 5.2 x 3.5 (inch) / 226 x 133 x 89 (mm) Maximum laminating width 4.4" / 112 mm Maximum laminating thickness 27.6 mil / 0.7 mm Film thickness 3~5 mil / 75~125 micron Number of rollers 2 Cold mode Yes Heating system...