Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
1.3 Receiving To answer a call: 1. When a phone rings, pick up its handset and talk with the party. 2. Hang up the handset upon completion of the call. 2 1.4 Intercom The intercom function is available when two or more telephones are connected to the IB-782. It allows communication between the telephones of the IB-782 and the telephones/handset of the communication unit IB-282 and between the telephones of the IB-782. COMMUNICATION UNIT IB-282 ANTENNA UNIT IB-182 MULTI-COMMUNICATION UNIT IB-782 JUNCTION BOX IB-313 TEL or FAX TEL or FAX TEL or FAX HANDSET TEL3 TEL or FAX TEL or FAX Max. 8 telephones Extension telephones connected to IB-782 TEL3 TEL1 TEL2 TEL1 TEL2 Connections for intercom feature Calling IB-782’s telephones 1. Pick up the receiver and listen for the dial tone. 2. Dial party’s extension number, then press the [#] button. For example, if the party’s extension number is “2,” dial [2], [#]. 3. Talk with party. Note: The busy tone sounds if an invalid extension number is dialed. Hang up the receiver and dial again. 4. Hang up the receiver upon completion of the call. Calling communication unit’s telephones 1. Pick up the receiver and dial “0” (number for connecting with Inmarsat services). Listen for the dial tone. 2. Press the [*] button, dial party’s extension number, then press the [#] button. For example, if the party’s extension number is “2,” dial [*], [2], [#]. Dial “0” to call the communication unit’s handset. 3. Talk with party. 4. Hang up the receiver upon completion of the call. Calling from communication unit’s handset to IB-782’s telephone 1. Pick up the handset, then press the [Intercomm] key. 2. Dial [3], [0], and party’s extension number (1-8). 3. Talk with party. 4. Press the [ ] key and hang up the handset upon completion of the call. 3 Calling from communication unit’s telephone to IB-782’s telephone 1. Pick up the receiver and listen for the dial tone. 2. Dial [*], [3], [0], party’s extension number (1-8), [#]. 3. Talk with party. 4. Hang up the receiver upon completion of the call. 1.5 Forwarding a Call A call may be forwarded to another telephone as follows: How to forward a call 1. Without hanging up the receiver, press the [HOOK] key. 2. Dial telephone extension number and [#]. 3. After the call has been forwarded, hang up the receiver. Note: The busy tone sounds if an invalid extension number is dialed. Cancel forwarding as below. Canceling forwarding If the called party does not answer, cancel forwarding by press the [HOOK] key. You may also cancel forwarding by hanging up the receiver. 1.6 Automatic Call Forwarding Calls can be automatically forwarded to another telephone as follows: Setting Dial [*], [9], [0], [0], extension telephone number to forward call to, [#]. Note: The SEND LED on the front panel lights when setting automatic call forwarding. Cancelling Dial [*], [9], [0], [0], [#] 4 1.7 Receive-Only Telephone Any telephone connected to the IB-782 can be designated as a “receive-only telephone.” This requires setting of a DIP switch. For this procedure see paragraph 2.3. Setting From the telephone to set as “receive only”, dial [*], [5], [9], [1], [#] Cancelling From the telephone not designated as receive-only telephone, dial [*], [5], [9], [1] and the telephone number you wish to cancel as a receive-only telephone. Note: The intercom function is not available from a “receive-only telephone.” 5 2. SETTINGS 2.1 PBX Mode Settings Set the PBX mode from handset connected to the communication unit of the FELCOM 82 to enable use of the IB-782. 1. Turn on the communication unit. 2. From the handset of the communication unit, press [FUNC Quit], [5], [9], [8] to display the OID/OID menu. 59OID/DID PBX Mode: ON ON/OFF Enter:[Ent] Quit: {Quit] OID/DID menu 3. Press the [ ] or [ ] key to select “PBX Mode” to ON. 59OID/DID PBX Mode: ON ON/OFF DID Mode: OFF ON/OFF Enter:[Ent] Quit: {Quit] Displayed when PBX mode is turned ON. OID/DID menu 4. Press the [ ] key to select DID Mode. Press the [ ] or [ ] key to select OFF. 59OID/DID PBX Mode: ON ON/OFF DID Mode: OFF ON/OFF Enter:[Ent] Quit: {Quit] OID/DID menu 5. Press the [Ent] key. 6. Press the [FUNC Quit] key to finish. 6 2.2 OID/DID Setting Set the ID number of each telephone connected to the IB-782, from the handset connected to the communication unit. The two-digit ID number should be the same as the telephone no. (01-08); for example, TEL No. 2 would be “02.” ID numbers should be set after setting the PBX mode, the instructions for which appear in the paragraph 2.1. 1. Turn on the communication unit. 2. From the handset, press [FUNC Quit], [5], [9], [3]. 59OID/DID EXT:0 1 NUM OID/DOD TEL: / IMN: FAX: / IMN: Enter:[Ent] Quit: [Quit] OID/DID menu 3. Enter telephone ID number in the EXT field, using the numeric keys. 4. Press the [ ] key, then enter OID/DID number and Inmarsat number. If the OID/DID number is 03 and the IMN is 343164710 hit the following keys: [0] [3] [0] [3] [ ] [3] [4] [3] [1] [6] [4] [7] [1] [0] The cursor...