Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
disconnect tools before sertool. Make sure your air hose is in vicing, changing accessories, or good condition and is long enough to moving to another location. reach your work without stretching. 18. do not overreach. Keep 11. Wear proper apparel. do not proper footing and balance at all wear loose clothing, gloves, neck-times. ties, rings, bracelets, or other jew-19. use the recommended elry which may get caught in moving accessories. Consult owner’s parts. non-slip footwear is recom-manual for recommended accesmended. Wear a protective hair cov-sories. the use of improper accesering to contain long hair. sories may cause risk of injury. 12. alWays use ansi approved 20. checK for damaged parts safety glasses. Also use a before using. Check for bind- face or dust mask if cutting operation ing and alignment of parts, broken is dusty. Everyday eyeglasses only parts, part mounting, loose bolts, have impact resistant lenses, they and any other conditions that may are not safety glasses. affect machine operation. repair or 13. Wear approved hearing replace damaged parts. protection. 21. never leave unattended 14. secure WorK. use clamps or a tool connected to air. vise to hold work when practical. it is disconnect the air hose and do not safer than using your hand and frees leave tool until it is relieved of any both hands to operate tool. built up pressure. 15. maintain tools With care. 22. never alloW untrained Keep tools lubricated and clean users to use this tool for best and safest performance. While unsupervised. Follow instructions for lubricating 23. if you are unsure of the and changing accessories. intended operation, stop 16. reduce the risK of using the tool. seek formal unintentional starting. do training or research books or maganot carry tool with hand on trig-zines that specialize in pneumatic ger and always disconnect from air tools. when not in use. t21347 2" nailer Kit -1 additional safety instructions for nailers/ staplers 1. hand inJuries: do not place 6. hose usage: Make sure your air your hands near the nail/staple point hose is designed for the tool in use, is of entry. A nail/staple can deflect in good condition, and is long enough and tear through the surface of the to reach your work without stretching. workpiece, puncturing your hand or however, an overly long air hose in fingers. the work area may be a tripping haz2. combustible gases: never con-ard. nect the nailer/stapler to pressurized 7. operating Questions: if you oxygen or other combustible gases are not sure about the intended operas an air source. only use filtered, ation, stop using the nailer/stapler. lubricated, and regulated compressed seek formal training. air. 8. cleaning: never use gasoline or 3. safe handling: never point the other flammable liquids to clean the nailer/stapler at others! do not keep nailer; vapors in the nailer/stapler the trigger pulled when loading fas-will ignite by a spark and cause it to teners, carrying, or holding tool. Carry explode. the tool only by the handle, never by 9. maintenance: Always disconnect any other part. do not carry the tool air from the nailer/stapler when serby the air hose. disconnect the nailer/ vicing or installing nails. during main- stapler from the air hose when going tenance, a nailer/stapler connected up and down ladders. to air may fire accidentally, causing 4. modifications: do not modify serious personal injury. this tool or bypass the safety nose 4. checK valve: do not use a check mechanism. valve or any other fitting that allows 5. compressed air rating: do air to remain in the tool after it is dis- not connect the nailer/stapler to com-connected from the air source. pressed air that exceeds 120 psi. -2- t21347 2" nailer Kit T21347 2" Nailer Kit -3- Operating this nailer can propel objects into the air, causing immediate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when operating this equipment. In addition, this nailer discharges at up to 85-90 decibels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer. Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious personal injury. Nailer/stapler accidents routinely happen while moving the gun to another location, such as up ladders, to another room, or even another job site. Always disconnect the gun immediately after use and never transport the gun while connected to the air—even if the air compressor is disconnected from its power source! No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious p...