Assessments - 4, GPA: 3
(
)
)
|
Facilidade de uso
on the starboard (right). Be sure there are no obstructions at the front or side within the light’s arc of visibility (112.5° each side). Measure and mark location of wire clearance hole. At the marked location(s), 3. make a mark for a 3/8” hole. (Figure 2). Both mounting holes must be the same distance from the bow. • DRILLING INSTRUCTIONS Remove the cover. (Figure 2). 1. Align hole beneath light base with the position you’ve marked clearance hole. Set the lamp toward the bow. Use the light base as a template to mark locations for holes (use two #8 stainless steel screws). CAUTION Position holes carefully on aluminum boats Drill wire clearance hole and pilot holes 4. MOUNTING INSTRUCTIONS Feed wires through the hole in 1. Insert two #8 stainless steel the deck. Snap stainless steel 3. NOTE: If area below the length of 16-to an accessible WIRING INSTRUCTIONS The power supply must be 12-volt DC ONLY. Use crimp-type marine-grade connectors with suitable waterproof insulation. Protect all connections with suitable materials. NOTE: Failure to make proper connections and fuse the light properly will void the product warranty. CAUTION Polarity is important. If wiring is mis-connected the LED light will not operate. Connect wires to fused power source: (See Figure 3). 1. • Connect the (-) black wire to the negative (-) wire from the 12-volt supply. • Connect the (+) gray or red wire along with proper fuse and switch to the positive (+) 12-volt supply. Fuse must be 1-amp. • Note that navigation rules require sidelights to be operated separately from2. anchor lights. Use either two switches or a single switch with three positions for off/anchor/running. ATTWOOD LIMITED 10-YEAR WARRANTY Because of the longevity of Attwood’s LED lighting technology, Attwood offers a limited 10-year warranty on this LED lighting product. See Product Catalog or attwoodmarine.com for details. Figure 1 / Figura 1 Abbildung 1 / Figur 1 AB Figure 2 A. Red (Port) B. Green (Starboard) Figura 2 A. Rojo (babor) B. Verde (estribor) Figur 2 A. Rod (babord) B. Gron (styrbord) Figure 2 A. Rouge (babord) B. Vert (tribord) Abbildung 2 A. Rot (Backbord) B. Grun (Steuerbord) Figure 2 / Figura 2 Abbildung 2 / Figur 2 Figure 3 A. Pilot Holes B. Bow Direction C. Base D. Mounting Screw E Lens Cover . Figura 3 A. Agujeros guia B. Direccion a la proa C. Base D. Tornillo de montaje E. Tapa de la lente Figur 3 A. Styrhal B. Stavriktning C. Faste D. Monteringsskruv E. Linsholje C D E B A Figure 3 / Figura 3 Abbildung 3 / Figur 3 A F Figure 3 A. 1-Amp Fuse B. Switch C. (pos) D. (neg) E. 12 V DC F Green (Starboard) . G Red (Port) . Figura 3 A. Fusible de 1 amperio B. Interruptor C. (positivo) D. (negativo) E. 12 V de CC F Verde (estribor) . G Rojo (babor) . Figur 3 A. 1 A-sakring B. Brytare C. (pos) D. (neg) E. 12 V DC F Gron (styrbord) . G Rod (babord) . B G Figure 3 A. Fusible d’un ampere B. Interrupteur C. (pos.) D. (neg.) E. 12 volts CC F Vert (tribord) . G Rouge (babord) . Abbildung 3 A. Sicherung...
Este manual também é adequado para os modelos :equipamento de barco - 3560 (109.4 kb)