Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
If no signal is received for more than 2 seconds after a Page has opened the squelch, the squelch then closes. ■ Receiving a Call with your Station Code When a signal is received encoded with your individual code, the squelch opens and you hear an alert tone from the speaker. In addition, the display shows "OP" and the calling station’s code. Press [PTT] while "PAG" is blinking to respond to the calling party. ■ Receiving a Call with a Group Code When a signal is received encoded with the correct group code, the squelch opens and you hear an aiert tone from the speaker. In addition, the display shows the received group code and in which memory (1 to 6) that group code has been stored. Press [PTT] while "PAG" is blinking to respond to the calling party. Note: t “E" appears on the display if your transceiver fails to receive the Page code correctly. ► The microphone is inhibited while the Page code is transmitted. ► It’s advisable to turn OFF Battery Saver when you use Page. 45 PAGE CODE AND REPEATERS Pressing [PTT] transmits the Page code after a short delay. This delay helps avoid losing Page data when using repeaters with long response times that may miss receiving a portion of the Page code. The delay time is 350 ms during simplex operation. When using transmit offset or split operation, you can change 350 ms (default) to 550 ms. 1 Press [CALL] + POWER ON to enter Menu Set-up. 2 Turn the ENC/SQL control to select Menu No. 08. • The current delay time is displayed. 3 Press [CALL] to select "350" or "550". 4 Press any key other than [CALL], [LAMP], or [MONI] to exit Menu Set-up. 46 LOCKING-OUT CODES The following explains how to inhibit the transceiver from receiving specific Page codes. Although the codes are locked-out from the receiver, the transmitter still transmits a Page on the locked out channels. 1 Press [F], [1]. * "PAG" appears. 2 Press [F] (1 s), [1] to select Code Select. 3 Turn the ENC/SQL control to display the Page code to be locked-out. 4 Press [F] (1 s), [LAMP], • A icon on the display indicates the Page code is locked-out. • Each time this key combination is pressed, the selected Page code is locked-out and unlocked alternately. Wofe: You cannot lock-out memory 0 that stores the calling station’s code. AUTO PAGE CANCEL After successfully paging another station, it is useful to turn OFF Page to eliminate sending a Page code each time you transmit. Auto Page Cancel handles this situation automatically when a station you called responds using the correct Page code to open your transceiver’s squelch. On your next transmission, your transceiver then switches OFF your transceiver’s Page function. 1 Press [CALLJ + POWER ON to enter Menu Set-up. 2 Turn the ENC/SQL control to select Menu No. 11. • The current Page Cancel status appears. • The default is "OFF". 3 Press [CALL] to select "OFF" or "ON". • OFF: Does not affect Page status. * ON : Switches OFF Page after transmission. 4 Press any key other than [CALL], [LAMP], or [MONI] to exit Menu Set-up. OPEN PAGE When both this function and Page are ON, any signal opens the squelch; however, if a correct Page code is received, the calling station’s code appears on the display. This feature is beneficial when you want to generally monitor activity on a frequency but you want to be especially sure not to miss a friend’s call. 1 Press [CALL] + POWER ON to enter Menu Set-up. 2 Turn the ENC/SQL control to select Menu No. 10. • The current Open Page status appears. • The default is "OFF1'. 3 Press [CALL] to select “OFF" or "ON". • OFF: Noise squelch functions. * ON : Open Page functions. 4 Press any key other than [CALL], [LAMP], or [MONI] to exit Menu Set-up. 47 TONE ALERT Tone Alert provides an audible alarm to indicate when someone is transmitting on the frequency you are monitoring. Tone Alert is an effective partner with CTCSS, Page, or DTSS. When the correct signaling comes through, your transceiver beeps to alert you of an incoming call from a specific station. ACTIVATING TONE ALERT 1 Tune to the prearranged frequency. 2 Activate CTCSS, Page, or DTSS if you want to use these together with Tone Alert. 3 Press [F], [CALL]. • The "bell" icon appears. • Each time this key combination is pressed, Tone Alert toggles ON and OFF. 4 When the correct signal is received, the transceiver beeps and the “bell“ icon begins blinking. • The Display shows the number of hours and minutes elapsed after the signal was received. After 100 hours pass, the displayed time resets, and counting continues from 00.00. Each time a new signal is received, the time resets to 00.00. 5 When the "bell" icon is blinking, exit Tone Alert by pressing [PTT], • TH-22E/TH-42E: Pressing [T/CT] also cancels this function. Note: ► if Tone Alert is ON, APO does not turn the power OFF. ► If Tone Alert is ON, there is no speaker output except the beep tone. ► When a signal is received with the Beep function OFF, the "bell" ic...
Este manual também é adequado para os modelos :equipamento de barco - TH-22A (2.05 mb)
equipamento de barco - TH-22E (2.05 mb)
equipamento de barco - TH-42A (2.05 mb)
equipamento de barco - TH-42A/42AT/42E (2.05 mb)