Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
BANK-TYPE: Push [BANK] to select the desired bank number or name. AUTOMATIC SCAN TYPE: Channel setting is not necessary for this type. When turning the power ON, the transceiver automatically starts scanning. Scanning stops when receiving a call or when taking the microphone off hook. Receiving and RECEIVING: q Push [ ] to turn the power ON. w Push [ ] and [ ] to select a channel. e When receiving a call, adjust the audio comfortable listening level. TRANSMITTING: r Take the microphone off hook. • 2-tone, 5-tone mute may be released. (The ‘audible’ condition is selected and “ ” appears.) • A priority channel may be selected automatically. t Wait for the channel to become clear. • The channel is busy when “ ” appears. y Push the [CALL] key when initiating a call from your side. • Coded audio may be heard from the transceiver, then “ ” appears. • This operation may not be necessary depending on your signaling system. Contact your dealer. u While pushing and holding [PTT], speak into the microphone at your normal voice level. i Release [PTT] to receive. IMPORTANT!: To maximize the readability of your signal; . Pause briefly after pushing [PTT]. . Hold the microphone 2 to 5 cm (0.8 to 2 inches) from your mouth, then speak into the microphone at a normal voice level. OPERATION 2 DTransmitting notes • Transmit inhibit function The transceiver has several inhibit transmission under the following conditions: - The channel is in mute condition (‘Inaudible’ condition; “ ” does not appear). - Channel is busy. - A matched/un-matched CTCSS code is received. - The selected channel is a ‘receive only’ channel. • Time-out timer After continuous transmission for a pre-programmed period, the time-out timer is activated causing the transceiver to stop transmitting and automatically select receive. • Penalty timer Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer. 2 OPERATION DTX code channel If the transceiver has a [TX CH] key, the display can be toggled between the operating TX code channel number (or TX code channel number (or name) is displayed, [ ] / [ ] keys select the TX code channel. To select a TX channel: q Push [TX CH] —a TX code channel appears. w Push [ ]/ [ ] to select the desired TX code channel. e Push [CALL] to transmit the selected TX code. r Push [TX CH] again to return to the channel display. DTX code number selection If the transceiver has a [TX CH] key, TX code contents can be changed within the allowable digits. To select a TX code: q Push [TX CH] —a TX code number appears and the first digit blinks. w Push [ ]/ [ ] to select the desired number of the blinking digit. e Push [TX CH] to enter the selected number and the next digit will start blinking automatically. r Repeat step w and e to input all allowed digits. t Push [CALL] to transmit the selected TX code. DDTMF transmission If the transceiver has a [DTMF] key, the automatic DTMF transmission function is available. may be available. To transmit a DTMF code: q Push [DTMF] —a DTMF code channel appears. w Push [ e Push and hold [DTMF] to transmit the DTMF code on the ] / [ ] to select the desired DTMF channel. selected DTMF channel. DScrambler function The UT-109 (#02) or UT-110 (#02) optional voice scrambler unit provides high performance private communication between stations with the same scrambler codes. To turn the scrambler function ON and OFF: q Push and hold [SCRM] to turn the scrambler function ON. w Push [SCRM] to turn the function OFF. OPERATION 2 DUser set mode User set mode is accessed set seldom-changed settings. transceiver operation operating style. Entering the user set mode: q While pushing and holding [ ] and [ ] , push [ POWER] to enter user set mode ON, allowing you to changed settings. w Push and hold [P0] to select the appropriate item. Then, push [ ] or [ ] to set the desired level/mode. - Available set mode functions; • Backlight : OFF, Dim, Auto or ON • Beep : OFF or ON • SQL Level : 0 to 255 • AF Min level : 0 to 255 e Push [ POWER] (or push and hold [P0] ) again to exit set mode. User set mode is also available via a programmable key. Please refer to p. 6 [SET] section. 3 OPTIONAL SmarTrunk ™ OPERATION SmarTrunk II ™ and conventional This transceiver is capable of II™ functions. The optional UT-105 allows communication in conventional channels or SmarTrunk II™ channels. Select a channel bank for SmarTrunk II™ before trunking operation. • Push [ BANK] several times to select a channel bank for conventional channels or SmarTrunk II™ channels. - Scanning starts when a channel bank for SmarTrunk II™ operation is selected. - Contact your dealer for channel bank details. NOTE: Optional HM-100TN DTMF MICROPHONE is required. Contact your dealer for details. SmarTrunk II ™ operation These features are enabled in your system. Contact your dealer for details. DPlacing a telephone call Enter the phone number followed by [1], M] . • A high-pitched beep indicates that t...
Este manual também é adequado para os modelos :equipamento de barco - IC-F110 (733.5 kb)