Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
B Printed in Taiwan Thru-Hull Intelliducer Installation Instructions To obtain the best possible performance, install your Thru-Hull Intelliducer according to the following instructions. If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional installer. The Intelliducer is designed for metal and fiberglass boats. Do not install this Intelliducer in a wood-hull boat. This Thru-Hull Intelliducer provides depth information either to a NMEA 0183-compatible device, or to your existing NMEA 2000® network, depending on the model. For more information about NMEA 2000, visit WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important information. Product Registration Help us better support you by completing our online registration today! Connect to our Web site at Keep the original sales receipt, or a photocopy, in a safe place. For future reference, write the serial number assigned to your Intelliducer in the space provided. The serial number is located on a sticker on the top portion of the Intelliducer. Serial number Contact Garmin Contact Garmin if you have any questions while installing or using your Intelliducer. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, or go to In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK). Packing List and Tools Needed Before installing your Intelliducer, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealer immediately. Standard Package • Thru-Hull Intelliducer – top and bottom portions • Gasket and locking ring • Power/data cable, or NMEA 2000 cable • NMEA 2000 T-connector Tools Needed (not included) • Angle finder OR digital level • Safety goggles and dust mask • Drill and drill bits • Hole saws • Sandpaper • Mild detergent OR weak solvent (such as isopropyl alcohol) • Marine sealant (suitable for below- waterline use) (3M - Fast Cure 5200 or Boat Life - Life Seal recommended) • Cable ties • Water-based antifouling paint (mandatory for salt-water installations) • File (metal hull installations) • Fiberglass cloth and resin OR 2 in. (51 mm) cylinder, wax, tape, and casting epoxy (cored fiberglass hull installations) Thru-Hull Intelliducer Installation Instructions Install the Intelliducer To install the Thru-Hull NMEA 2000 Intelliducer: 1. Choose a location. 2. Drill through and prepare the hull. 3. Install the Intelliducer in the hull. 4. Connect the Intelliducer your existing NMEA 2000 network. OR Connect the Intelliducer to power and a NMEA 0183-compatible device. 5. Update your Garmin chartplotter (if applicable). Step 1: Choose a Location to Install the Intelliducer It is very important to carefully choose a proper location on your boat to install the Thru-Hull Intelliducer. When choosing a location, consider the following guidelines. General • The Intelliducer is designed for metal- and fiberglass-hull boats. CAutIoN: Do not install the Intelliducer in a wood-hull boat, because swelling wood can break the intelliducer and possibly sink your boat. • Install the Intelliducer as close to the keel as possible. • Install the Intelliducer away from obstructions and sources of interference such as the propeller, shafts, other machinery, other sounder transducers, and cables. • Do not mount the Intelliducer near water intake openings or water discharge openings. Do not mount the Intelliducer behind fittings, strakes, or irregularities in the hull. • The Intelliducer must be submerged at all times during use. • You must be able to access the Intelliducer from inside the boat. • Allow for 8 in. (200 mm) top clearance and 6 in. (150 mm) of clearance around the Intelliducer to accommodate the height of the internal unit housing, and to allow for the rotation and connection of the internal unit housing. Hull Types Additional, boat-specific details should be considered when choosing a location. Sailboats • Fin Keel – Install as close as possible to the centerline, 1–2 ft. (300–600 mm) ahead of the fin. • Full Keel – Install midships, at the point with the least deadrise. outboard and Inboard/ outboard engine boats • Mount slightly forward of the engine, off of the transom. • Mount on the side where the propeller blades are turning downward, or centered between dual engines. Mount as far aft as possible, but out of the wash of the propellers. Fin keel sailboatFull keel sailboatStepped hull powerboatOutboard and I/OInboardFin keel sailboat Full keel sailboat Stepped hull powerboat Outboard and I/O Inboard Thru-Hull Intelliducer Installation Instructions Inboard engine boats • Mount forward of the shaft and propeller, and ensure the location is submerged at high speeds. Planing hull boats • Mount within the first set of lifting strakes, near the k...