Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
Uncompromised. ROTEL CASSETTE ETDECK RD-KXXXn WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Write your SERIAL NUMBER here. The number le located near the name plate on the unit's rear panel. -SERIAL NUMBER- THE RDTEI_CCD., LTTD. 1-36-8 Ohokayama, Meguro-ku, Tokyo, Japan ENGLISH J INTRODUCTION We at Rotel want to thank you for purchasing our audio product. Rotel audio products are designed to use the latest electronic technology, and they incorporate our long experience asa specialist manufacturer of audio equipment. We are confident that you will find satisfaction in the high quality sound and top performance, and that you will find pleasure in the functional beauty achieved through human-engineering concept. Before starting operation, please read this instruction manual thoroughly and acquaint yourself with the proper mode of using the unit and all its connections. We hope you will enjoy top-notch performance for many years to come. POWER SUPPLY CONNECTION For power the unit requires the normal house electrical current (AC). You may simply plug the unit to a wall outlet, or to your amplifier's (or receiver's) switched or unswitched AC outlet. If it is plugged to a switched outlet, by leaving the power switch of the unit on, you will be able to maintain switching control for the cassette deck with your amplifier or receiver. If it is connected to an unswitched outlet, like connecting to a wall outlet you must use the cassette's own power switch for switching control. CAUTION — Do not apply power without first making sure the pro per connections are completed. If you live in U.K. and your unit comes with 2-core cord without a plug, be sure to read the exclusive caution for U.K. EXCLUSIVE NOTE FOR U.K. If your unit comes with a 2-core cable without a plug, make certain live and neutral leads are connected to the proper terminals. Check that the terminals are screwed down firmly and no loose strands of wire are present. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLUE or BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the leter L or coloured BROWN or RED. ENGLISH INSTALLATION Be sure to place the unit in a level and flat place where it is free from humidity, vibration, high temperature and not exposed to direct sunlight. Be careful not to place the unit in a highly enclosed place such as near a wall or on a bookshelf. A poor ventilation will cause undesirable effects to the unit. CONNECTION TO RECEIVER OR AMPLIFIER Connect the unit's rear panel terminals to the TAPE MONITOR terminals of your amplifier, using either the RCA cords or a single DIN type record/playback cord. The unit's LINE IN terminals should be connected to the TAPE MONITOR OUT terminals of the amplifier, and the LINE OUT terminals to the TAPE MONITOR IN terminals of the amplifier. Be certain to properly match right and left terminals between components. Do not attempt to connect the RCA type cords when the DIN type record/playback cord is used. Note: Set the input selector switch at the left position when DIN cord is used, and at the right position when RCA cord is used. TAPE MONITOR AMPLIFIER (RECEIVER) WHEN USING DIN TYPE REC PB CORD ___ RD-1000M LINE IN REC.--OIN-LINE OUT PLAY INPUT SELECTOR DIN LINE IN RK5HT LEFT RECjy™ RIGHT LEFT INPUT SELECTOR TAPE MONITOR AMPLIFIER (RECEIVER) MICROPHONE AND HEADPHONE CONNECTION Microphones and headphones may be connected to the unit using the respective jacks on the front panel. When using stereo microphones, be sure connections are made properly to the left and right jacks NOTE Microphones must not be connected except when carrying out microphone recording CONTROL FUNCTIONS (i) EJECT BUTTON This button is used for placing cassette tapes in the deck or for removing tapes. When the button is pressed, the cassette door will open for placement or removal of the tape. The cassette door can then be closed manually. (2) Phones Jack You may connect a pair of headphones to this jack for private listening. (3) Power Switch Performs the function as its name denotes. It supplies power to the unit and to any switched AC outlets. When the switch is ON the cassette holder light will be illuminated. ï (4) Cassette Trap Door Depress the EJECT button to open the door, and push lightly with your fingers to close the door (5) Rewind Button Depress this button to rapidly return the tape in the direction of the arrows. To protect the tape, this function will automatically disengage when the tape is fully wound onto the supply...