Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
FLUORESCENT DISPLAY REWIND( ) BUTTON Press this button to rewind the tape rapidly during forward playback or to advance during reverse playback. FAST FORWARD( ) BUTTON Press this button to advance the tape rapidly during forward playback or to rewind during reverse playback. RECORD/RECORD MUTE( ) BUTTON Press this button to record or to make a 4 second blank space between the programs for automatic music search, etc. DOLBY NR BUTTON Press this button to select the Dolby B NR system when playing back or recording. COUNTER RESET BUTTON Press this button to reset the counter to “0000”. CD SYNCHRO RECORDING BUTTON Press this button to use the CD SYNCHRO RECORDING function. REVERSE MODE BUTTON Press this button to select the desired reverse mode. ENGLISH HGFECBAD TAPE COUNTER DISPLAY RECORD INDICATOR TAPE DETECTION INDICATOR TAPE DIRECTION DISPLAY DOLBY B NR INDICATOR REVERSE MODE DISPLAY LEVEL METER DISPLAY CD SYNCHRO RECORDING INDICATOR WHEN USING THE SYSTEM REMOTE CONTROL UNIT OF RX-801R This unit can be remotely controlled with Sherwood system receiver RX-801R. • To listen to a tape by using the system remote control unit of RX-801R, first connect SYSTEM CONNECTOR jack of this unit to that of Sherwood system receiver RX-801R. • With the system remote control unit of RX-801R, you can use additional functions. 7 Before Operation NOTES ON CASSETTE TAPE • Do not store the tapes in direct sunlight or near equipment that generates heat. Keep the tapes away from any magnetic fields. • Do not touch the tape surface and store the tapes in their cases after use. Dust can cause contamination of the heads resulting in noise. ENGLISH • Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. • After the recording has been finished, remove the tab to prevent the recorded contents from being erased or recorded on accidently. For side B For side A • To rerecord after tabs have been removed, cover with adhesive tape. • Do not cover the tape detection holes for chrome (CrO2) tape. PRINCIPLE OF DOLBY B NR SYSTEM The Dolby NR system functions so that it automatically increases recording levels of medium and high frequencies when the recording signal level is lower than the specified level(encoding), and automatically reduces the output level to the normal level during playback(decoding). In this way, the tape hissing noise is remarkably reduced without affecting the sound quality. The Dolby B NR system used in your Cassette Deck improves S/N ratio by about 5 dB at 1 kHz and about 10 dB at 10 kHz. Manufactured under lincense from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. CLEANING THE HEAD SECTION Clean the head section about every 10 hours of use with a commercially available head cleaning tape. • For better recordings, you should clean the head section before every recording. • After cleaning the head section, do not load a tape until the cleared section is completely dry. DEMAGNETIZING THE HEAD When the recording/playback head is magnetized, the sound quality will be deteriorated. In this case, demagnetize the head using a commercially available demagnetizer. AUTO TAPE SELECTOR The type of tape loaded is detected automatically by the auto tape selector and recording bias and equalization are set automatically according to the characteristic of that tape such as normal or chrome(CrO2) tape. 8 9 ENGLISH Operations • To use the system remote control unit of Sherwood system receiver RX-801R, first connect the SYSTEM CONNECTOR jack of this unit to that of RX-801R.(Refer to the operating instructions of the RX-801R.) PLAYING BACK A TAPE In case of the tape recorded with Dolby B NR system, select the Dolby B NR 3 mode. Select the desired reverse mode. 4 • Each time the POWER(ON/STANDBY) button is pressed, this unit is turned on or off. • Each time this button is pressed, the Dolby B NR mode changes as follows: DOLBY B NR(“B” light up) OFF • On the commercial tapes, if Dolby NR or “ ” appears, the tapes are recorded with the Dolby B NR. • Each time this button is pressed, the reverse mode is selected as follows: Start playback. 5 Turn the power on. 1 ON/STANDBY SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 SYSTEM REMOTE CONTROL UNIT (only for RX-801R) DISPLAY REV.MODE SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE EON RDS REMOTE CONTROL UNIT RM-404 SYSTEM REMOTE CONTROL UNIT (only for RX-801R) DISPLAY DOLBY SLEEP EDIT AUTO/MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER CD TAPE POWER 1 2 3 4 5 6 7 8 9 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM EON RDS CD SYNC. REV.MODE REMOTE CONTROL UNIT RM-404 DISPLAY TAPE or Back side Fro...
Este manual também é adequado para os modelos :Receptores - DS-801 (349.66 kb)
Receptores - DS-801 (349.66 kb)