Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral tri- A angle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. Read instructions — all safety and operation instructions should be read before using the cassette deck. 2 ■ Retain instructions for future reference. 3 .Heed warnings — all warnings on the cassette deck and in its operations instructions should be adhered to. 4. Follow all instructions. 5 ■ Water and moisture — do not use the cassette deck around water, for example near a swimming pool, sink or in a wet basement. 6 • Ventilation — The cassette deck should be situated so that its location or position does not interfere with its proper ventilation. 7. Heat — The cassette deck should be situated away from heat sources such as radiators, fireplaces, stoves, electric popcorn poppers or other appliances that produce heat. Also avoid prolonged contact with direct sunlight and extremely low temperatures. 8 ■ Always use the correct AC voltage - Always connect the power cord to a domestic mains outlet. Never connect the unit to an outlet supplying a higher voltage. This may create a fire hazard. NOTE FOR CUSTOMERS OTHER THAN CANADA This unit is supplied with a voltage selector enabling selection between 220V and 240V on the rear panel. If the selector is not set to the local voltage, set the selector to the correct voltage with a screwdriver before connecting the power cord to a mains outlet. O • Power cord protection — Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recep- ; tacles and the point at which the cord exits from the , cassette deck. Also never pull or stretch the cord. 10. Cleaning — Do not use volatile solvents such as alcohol, gasoline, benzine etc. to clean the cassette deck cabinet. Use only a clean dry cloth. If you must use a wet cloth, j wet only the cloth lightly with water. • Object and liquid entry — Care should be taken so that objects (including excessive dust) do not fall into the unit, and that liquids are not spilled into the inside of the cassette deck. 2 I £- . Abnormal smells — If abnormal smell or smoke is detected, immediately turn the cassette deck power OFF and pull out the power cord. Contact your dealer or nearest Harman Kardon Service station. 13- Damage requiring service —The cassette deck should be serviced by qualified service personnel when: A. The power supply cord or the plug have been damaged; or B. Objects have fallen, or liquid has been spilled into the cassette deck; or C. The cassette deck has been exposed to rain; or D. The cassette deck does not appear to operate normally in performance; or E. The cassette deck has been dropped or the cabinet damaged. 14. Servicing — The user should not attempt to service the cassette deck beyond those means described in this manual. All other servicing should be referred to qualified service personnel. FOR CUSTOMERS IN THE UK Your unit is supplied with the flex which will have either two or three wires, so the following items should be observed to guarantee safety: THREE CORE FLEX WARNING: THIS APPARATUS MUST BE EARTHED. IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: Green-and-yellow : Earth Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol ♦ or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. TWO CORE FLEX IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is colour...
Este manual também é adequado para os modelos :Receptores - TD262 (678.73 kb)