Assessments - 3, GPA: 3
(
)
)
|
Fotos e especificações Pioneer KEH-P6010R |
por este dispositivo também tem outras instruções :
Unidade - KEH-P6010R (1.89 mb)
Unidade - KEH-P6010R (1.89 mb)
Unidade - KEH-P6010R (1.88 mb)
Facilidade de uso
It is especially important that you read and observe the “Precaution” on page 5 and in other sections. This manual explains head unit operation. You can perform the same operations with the steering remote controller. When using the Remote Controller (CD-R600) CD-R600, another sold separately remote controller, is equipped with the PGM button in which a frequently used function is preprogrammed by each source. A press of PGM button activates the functions in the following chart. Source Function name Page Tuner Best Stations Memory (OFF) 16 Best Stations Memory (ON) (Hold for 2 seconds) 16 Cassette Player Blank Skip 25 Multi-CD player Pause 28 4 Before Using This Product Precaution • The Pioneer CarStereo-Pass is for use only in Germany. • Keep this manual handy as a reference for operating procedures and precautions. • Always keep the volume low enough for outside sounds to be audible. • Protect this product from moisture. • If the battery is disconnected, the preset memory will be erased and must be reprogrammed. In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. When using the 50-Disc Type Multi-CD Player The available functions of the 50-Disc Type Multi-CD Player are described in this Operation Manual. Note that other 50-Disc Type Multi-CD Player functions cannot be used with this product. 5 Basic Operation ENGLISH To Listen to Music The following explains the initial operations required before you can listen to music. Note: • Loading a cassette in this product. (Refer to page 9.) 1. Select the desired source. (e.g. Tuner) Each press changes the Source ... Each press of the SOURCE button selects the desired source in the following order: Tuner = Cassette Player = Multi-CD player = External Unit = AUX Note: • External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Only one External Unit can be controlled by this product. • In the following cases, the sound source will not change: * When a product corresponding to each source is not connected to this product. * When no tape is set in this product. * When no magazine is set in the Multi-CD player. * When the AUX (external input) is set to OFF. (Refer to page 46.) • When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal, the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna, switch the source OFF. Continued overleaf. 6 Basic Operation 2. Raise or lower the volume. Rolling the VOLUME changes the volume level. Note: • Roll clockwise to raise the volume level. • Roll counterclockwise to lower the volume level. 3. Turn the source OFF. Hold for 1 second 7 Basic Operation of Tuner This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. (Refer to page 18.) Manual and Seek Tuning • You can select the tuning method by changing the length of time you press the 2/3 button. Manual Tuning (step by step) 0.5 seconds or less Seek Tuning 0.5 seconds or more Note: • If you continue pressing the button for longer than 0.5 seconds, you can skip broadcasting stations. Seek Tuning starts as soon as you release the button. • Stereo indicator “.” lights when a stereo station is selected. Preset Tuning Band F1 (FM1) = F2 (FM2) = F3 (FM3) = MW/LW Preset Number Indicator Band Indicator Frequency Indicator • You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall. Preset station recall 2 seconds or less Broadcast station preset memory 2 seconds or more Note: • Up to 18 FM stations (6 in F1 (FM1), F2 (FM2) and F3 (FM3)) and 6 MW/LW stations can be stored in memory. • You can also use the 5 or ° buttons to recall broadcast stations memorized in buttons 1 through 6. ENGLISH ESPANOL DEUTSCH FRANCAIS ITALIANO NEDERLANDS 8 Basic Operation Basic Operation of Cassette Player Note: • Be sure to close the front panel after loading or ejecting a cassette. Open Note: • Use to open the front panel when loading or ejecting a cassette. (The illustration on the right shows the front panel open.) Direction Change Direction Indicator Play Time Indicator Note: • The continuous playback time count starts at 00’00” at the following times. * When a tape is inserted. * When the tape direction is changed. * When you rewind the tape side currently playing back to the beginning. • The continuous playback time count is halted when fast-forwarding/rewinding and while the Music Search function is operating. 9 Fast Forward/Rewind and Music Search • Each press of the 3 button selects Fast Forward or Forward-Music Search. FF (Fast Forward) = F-MS (Forward-Music Search) = Normal Playback • Each press of the 2 button selects Rewind or Rewind-Music Search. REW (Rewind) = R-MS (Rewind-Music Search) = Normal Playback Note: • Fast Forward/Rewind and Mu...
Este manual também é adequado para os modelos :Receptores - KEH-P6010RB (1.88 mb)