Assessments - 2, GPA: 4 ( )

Fabricante : Kenwood Arquivo Tamanho: 469.18 kb Arquivo Nome : Língua de Ensino:

Setting values: Front 15 – Rear 15 TEL Mute Shut down the audio incoming call is received. NOTE The function will not work if phone. When the telephone rings: When a call is received, "CALL" is displayed functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from the display, and the volume original source is restored gradually. Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one used before the phone call) returned to automatically, and the volume restored gradually. — 7— General features Tuner features Theft Deterrent English The faceplate of the SRC CLK 4 FM . helping to deter theft. Projections Release button Grooves Removing Faceplate: Press the release button. #1 ~ 6 AM The faceplate is unlocked, allowing you to detach AUD1 2 3 4 5 6 CLK ATT FFREW SRC PR OG PWR OFF SCAN RDM REP TC/D.SCN M.RDMLOUD DISC HIGH POWER 40Wx40Wx 4 MENU FM AM VOL ADJ NAME SETTI PTY NOTE • The faceplate is a precision piece of equipment and can damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching Faceplate: 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. AUTO indicator ST indicator Frequency Preset station number Band display — 8— Tuning 1 Press the SRC button obtained. "TUNER" is displayed selected. 2 Press either the FM or AM button Each time you press the FM button, between the FM1, FM2 and FM3. Press the AM button to select the MW 3 • Auto Seek Tuning Press the . button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies. • Preset station seek tuning Press the . button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the lowest number). NOTE If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/ . button to use preset station seek will receive channel 1. • Manual Tuning Press the . button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step. NOTE • The ST indicator lights up when stereo broadcasts are being received. • Please see the menu settings about selecting tuning mode. (page22) 1 Select the band/ 2 Hold down the button station, for two seconds The button number blinks the data has been stored. Recalling a Preset Station: Press the preset station button (#The number of the recalled station NOTE You can store 6 stations in each of the FM1, (MW and LW) bands. Clock display Turning clock display On/Off: Each time you press the CLK button, the display switches between the Programme Service name (during RDS station reception) and clock. Displaying Frequencies: Hold down the CLK button for one second or more. The frequency for the RDS station will be displayed for five seconds instead of the station name. Station Preset Memory Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. — 9— English RDS features RDS (Radio SRC CLK AUD1 2 3 4 5 6 CLK ATT AM FM FFREW SRC PR OG PWR OFF SCAN RDM REP TC/D.SCN M.RDMLOUD DISC PTY HIGH POWER 40Wx40Wx 4 MENU VOL ADJ NAME SETTI TI / VOL ADJ 4 . FM / PTY AM RDS is a digital information besides those of regular information being transmitted When listening to an RDS capability), the programme displayed along with the frequency, station is being received. RDS (Radio Data System) stations for the same station. When you are making long trips, this function automatically switches to the the best reception for the particular network you want to listen to. The data is automatically stored, allowing you to switch quickly to another RDS broadcasting the same programme, that has These include stations stored in the station preset you often listen to. Enhanced Other Network PTY indicator TI indicator Stations that offer also transmit information about other RDS stations that have traffic information. When you are tuned to a station that is not transmitting traffic information, but another RDS station starts transmitting a traffic bulletin, the tuner automatically switches to the other station for the duration of the bulletin. Alarm When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received. — 10 — Traffic Information Presetting Volume You can listen to tapes or discs, they is broadcast...

Baixe o seu

Para fazer o download, introduza 2 dígitos :