Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
• Remove a cassette tape from the unit when not listening to it for a whilst. If you leave a tape in the unit too long, it may stick to the tape head and cause unit malfunction. — 5— Switching Modes: Each time you press the SRC button, the mode switches as follows: Switching Modes You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. Power ON/OFF: When you turn your vehicle’s ignition on, the unit’s power will also turn on, with the faceplate reversing to show the control panel. When you turn your vehicle's ignition off, the faceplate will reverse to hide the control panel after a period of time which you have set in the "Time setting for removing the faceplate" in the menu. The unit's power will turn off. Alternatively, you can remove the faceplate during that period. For details, refer to the "Removing the faceplate" (page 10). • After installation of your Mask unit, be sure to transmit the Mask Key's signal to deactivate the demonstration mode. If this procedure is not carried out, the control panel of the unit will re-open in two seconds even with your vehicle's ignition turned off. • When the moving faceplate is hit by an object, it will stop and return to its original state. Remove the object and repeat the action. Using the Unit in Vehicles with Covered Consoles • Make sure the console is uncovered whilst the faceplate is reversed. • Do not exert any excess force on the movable parts of the unit, including the faceplate, as it can cause failure in the unit’s mechanism. 2CAUTION NOTE Power General features — 6 — English AUD B NR SCAN B.S/RDM REP MTL/M.RDM ANG LOUD T I DISP VOL ADJ NAME.S PROG /PTY PWR OFF 5 ° ATT/ LOUD SRC/ Q PWR OFF FM CLK ANG 4 AM . KRC-V879R KRC-779R ATT indicator LOUD indicator Speaker Setting indicator ATT indicator LOUD indicator Clock indicator SYSTEM Q indicator Clock indicator SYSTEM Q indicator Speaker Setting indicator t Tuner mode t Tape mode t External disc control mode t External disc control mode 2 / t Standby mode Selecting the standby mode: Press the SRC button repeatedly to select When "ALL OFF" is displayed, the standby mode The standby mode turns all functions off although unit’s power on. Use this mode when you want to have display illuminated but do not want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCAS210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDCCX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only). During the AUX mode, "AUX" (or AUX-name display) will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. • If you have selected Standby mode, the timer function that turns the power off automatically will be activated. To find out how to set the time on the timer, and how to cancel the timer function, refer to the section on the Power OFF Timer function under Menu settings (page 36). NOTE Selecting AUX-name display Holding down the DISP button for two seconds or more during the AUX mode, AUX-name display is blinked for AUX-name selection mode. Pressing 4 or . button during this "AUX" , "TV" , "VCP" in the AUX The AUX-name selection DISP button or doing Volume Increasing Volume: Press the 5 button to turn up the volume. Decreasing Volume: Press the ° button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. — 7— English General features Loudness Speaker Setting This function amplifies turned down. The LOUD indicator lights on. Turning Loudness On/Off: Hold down the LOUD button for the loudness on and off. System Q You can recall the best audio setting preset for different of the music. Switching the Preset Sound Setting: Each time you press the Q button, the preset sound setting switches as follows: Scan of Flat – Easy Easy(Default setting) Jazz Flat Rock User memory* Pops Top 40 *User memory: The unit returns to the state adjusted the last time with the audio control setting feature. As you proceed, each indicator would go on. NOTE The System Q function changes the values of the following sound quality parameters: Bass centre frequency, bass level, bass quality factor, bass extend, middle centre frequency, middle level, middle quality factor, treble centre frequency, and treble level. ...
Este manual também é adequado para os modelos :Receptores - CASSETTE RECEIVER KRC-779R (816.74 kb)
Unidade - KRC-779R (816.74 kb)
Unidade - KRC-V879R (816.74 kb)