Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
(Press the DIRECTION A button for DECK A and the DIRECTION B 4 5 RL 5 4 91 100 Refer to the following description. button for DECK B.) Each time one of these button is pressed, the tape running direction of the corresponding deck changes between forward (#) and reverse (@), and the indicator The REC indicator lights on the display. The deck enters the rec pause mode. Play the program source to be recorded and adjust the recording level and balance. Recording starts. lights on the display. Digital Super Surround (DSS) setting (in step 3) The DSS function can be utilized also for recording. Press the DSS MODE button to turn on the DSS function, and select one of the DSS programs by pressing the DSS button so that the corresponding indicator lights up. By recording with this function, you can enjoy the sources with your preferred DSS effect even when played back on car audios or portable headphone stereo systems. For details on DSS, see page 10. DOLBY NR selector setting (in step 4) Set the DOLBY NR selector according to your purpose. OFF: No noise reduction. B: For recording the sources with Dolby B NR. C: For recording the sources with Dolby C NR. .Dolby noise reduction is an extremely effective method of reducing undesirable background hiss on tapes. This unit incorporates both Dolby B NR and the newer Dolby C NR system. Dolby C NR is approximately twice as effective as the earlier Dolby B NR. REVERSE MODE selector setting (in step 5) The auto reverse function allows the tape running direction to be reversed automatically. Select an auto reverse mode (”), manual reverse mode (“) or RELAY recording mode. “: When recording on one side of a tape is finished, the deck stops at the end of the tape. ”: Both sides of a tape are recorded. After recording, the deck stops at the end of the tape. .When the tape running direction is set to ™, only the reverse side is recorded. RELAY: Cassette tapes loaded in DECKs A and B are recorded sequentially. (See “RELAY RECORDING” on page 15.) Setting the recording level (in step 8) Play the loudest passage of the source to be recorded and watch the meter readings. Adjust the REC LEVEL control so that the highest peak reaches +4 of the optimum recording level. Normally, it is best to adjust the BALANCE control such that the left and right meter readings are even. Display during recording KX-W582 30– R dB L 20 15 10 8 6 4 2 0 2 4 6 + HALL DISCO CHURCH JAZZ CLUB Peak level meters Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB range. There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds. DSS PRESET PROGRAM indicators REC indicator REC indicator To set the counter reading to “0000”, press the RESET button. Tape running direction indicator Tape counter Use the tape counter to aid in locating a point on a tape (0000 to 9999). Tape counter Use the tape counter to aid in locating a point on a tape (0000 to 9999). 30– R dB L 20 15 10 8 6 4 2 0 2 4 6 + Peak level meters Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB range. There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds. KX-W482 REC indicator REC indicator Tape running direction indicator To set the counter reading to “0000”, press the RESET button. To stop recording: To stop recording temporarily: Press the STOP button. Press the REC/PAUSE button. To resume recording, press the PLAY button. !. MUTE/SEARCH sDECK BDECK A REC MUTE operation - Inserting a blank space during recording During recording: MUTE/SEARCH During Rec mute operation, the REC indicator blinks. A 4-second blank interval is automatically recorded on the tape and then the deck enters Rec pause mode. If a blank interval longer than 4 seconds is desired, keep pressing for as long as you want. When the MUTE/ SEARCH button is released, the deck enters Rec pause mode after making a 4-second blank interval. To resume recording, press the PLAY button. .If a blank interval shorter than 4 seconds is desired, press the PLAY button at the desired point during Rec mute mode. Recording will be resumed from that point. REC RETURN operation - To return to the point at which the recording started During recording: .If the PLAY button is pressed during recording, Rec return operation automatically rewinds the tape to the point When the #indicator When the @indicator where the PLAY button was pressed. is lit: is lit: When the tape counter is reset to “0000” during recording, Rec return operation automatically rewinds the tape to the !. “0000” point. The tape then stops in both cases. REC/PAUSE DECK A/B PLAY sDECK BDECK A REC BALANCE/LEVEL DUAL RECORDING - To record a program source on both decks simultaneously To make the same tapes, use tapes of identical length. 1 Insert cassette tapes in both DECK...
Este manual também é adequado para os modelos :Receptores - KX W482 (251.17 kb)