Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Then, connect the AC power wall outlet. Using the player on batteries Insert four size D (R20) batteries (not supplied) into the battery compartment. Replace the batteries when the player stops operating. Replace all the batteries Specifications • Frequency range CFM-20: FM: 87.6 - 108 MHz AM: 530 - 1 710 kHz CFM-30TW: TV H (WEATHER): 7 - 13 ch TV L/FM: 2 - 6 ch/ 87.6 - 108 MHz AM: 530 - 1 710 kHz • Antennas FM/TV: Telescope antenna AM: Built-in ferrite bar • Recording system 2-track, mono • Frequency response 100 - 6 300 Hz • Speakers Full-range: 7.7 cm (3 1/ 8 inches) dia . 1 • Power output 0.8 W (at 10 % harmonic distortion in DC operation) • Battery life FM recording Sony R20P: Approx. 18 hours Sony LR20 alkaline: Approx. 50 hours Playback Sony R20P: Approx. 16 hours Sony LR20 alkaline: Approx. 42 hours • Power requirements 120 V AC, 60 Hz/6 V DC, four size D (R20) batteries • Power consumption AC5 W • Dimensions Approx. 278 . 154 . 130 mm (w/h/d) (11 . 6 1/ 8 . 5 1/ 8 inches) incl. projecting parts and controls) • Mass Approx. 1.9 kg (4 lb 3 oz) (incl. batteries) Design and specifications are subject to change without notice. Troubleshooting There is no audio. • Connect the AC power • Insert the batteries properly. • Replace all the batteries if they • Adjust the volume. • Set FUNCTION to the position you operate. Noise is heard. • Someone is using a portable telephone or other equipment that emits radio waves near the player. Move the portable telephone, etc., away from the player. Cassette cannot be inserted. • Insert the cassette properly. • Press xZ to release n. The z button does not function. • No cassette is in the tape compartment. • Make sure the safety tab on the cassette is in place. Poor playback, recording or erasing quality. • Dirty heads. Clean the illustrated portions with a cleaning swab slightly moistened with cleaning fluid or alcohol. • Demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer. Erase headPinch roller Record / Playback headCapstan Precautions On safety/power • Should any solid object player, unplug the player, qualified personnel before further. • Unplug the player from the wall not to be used for an extended period • For battery operation, use four size D (batteries. • When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. • The nameplate indicating operating voltage, power consumption, etc. is located at the bottom. On placement/operation • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place anything within 10 mm of the rear side of the unit. The ventilation holes must be unobstructed for the player to operate properly and to prolong the life of its components. • Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the player to prevent possible damage from the magnet. • Do not lift the handle when the telescopic antenna is extended. • If the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette. Notes on cassettes • Break off the cassette tab from side A or B Side A to prevent accidental recording. If you want to reuse the tape for recording, Tab for side A cover the broken tab Tab for side B with adhesive tape. • The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous re...
Este manual também é adequado para os modelos :Receptores - CFM-20 (84.57 kb)