Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
(The side facing you is called the forward side and the opposite side is called the reverse side.) To close the compartment, push in the compartment door until it locks shut. 2 DOLBY NR OFF/ B/ C Refer to the following description. MODE O/[/O/RELAY3 Refer to the following description. 4 DIRECTION Select the tape running direction for DECK A or B. Each time this button is pressed, the tape running direction changes between forward (#) and reverse (@), and the corresponding indicator lights on the display. 5 PLAY To fast forward or rewind the tape To stop playback When the tape running indicator #is lit: Press the STOP button. To remove the cassette tape, press Pressing the Ubutton fast forwards the tape while the EJECT button. The cassette compartment door opens. pressing the !button rewinds the tape. To turn off the power, press the POWER button. When the tape running indicator @is lit: Pressing the !button fast forwards the tape while To set the counter reading to “0000” pressing the Ubutton rewinds the tape. Press the RESET button. Use the tape counter to aid in locating a point on a tape (0000 to 9999). ENGLISHENGLISH DOLBY NR selector setting (in step 2) Be sure to set the DOLBY NR selector according to the system used for recording. OFF: For a tape recorded with DOLBY NR OFF. B: For a tape recorded with DOLBY B NR. C: For a tape recorded with DOLBY C NR. REVERSE MODE selector setting (in step 3) The auto reverse function allows the tape running direction be reversed automatically. Select an auto reverse mode ( ( ). , , or RELAY ) or manual reverse mode : When playback or fast forwarding (or rewinding) of one side of a tape is finished, the deck stops at the end of the tape. :Both sides of the tape are played back. After playing, the deck stops at the end of the tape. (When the tape running direction is set to U, only the reverse side is played.) When the tape is fast rewound to the beginning of the reverse side, playback automatically starts from the same side. When the tape is fast forwarded to the end of the forward side, playback automatically starts from the reverse side. : Both sides of the tape are repeatedly played back (up to 8 times). When the tape is fast forwarded or rewound to the beginning or the end of a side, playback automatically starts from the same side or the other side respectively. RELAY : Cassette tapes loaded in DECKs A and B are played back sequentially. (See “RELAY PLAYBACK” on page 9.) Display during playback Tape running direction Tape running direction indicator (DECK A) indicator (DECK B) U 30 dB– A NORM U R L 20 15 10 8 6 4 2 0 2 4 6 + UB URELAY DUB HIGH RECB C Tape counter Tape counter Peak level meters Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB range. There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds. To adjust the volume level Note Use the volume control of the amplifier or receiver. Never press the EJECT button during playback. To use headphones Insert the headphones plug into the PHONES jack. Since the sound is also heard from the speakers, operate the amplifier to cut off the sound from the speakers for private listening. 7 MUTE/SEARCH RESET !. NATURAL SOUND STEREO DOUBLE CASSETTE DECK K-902 DOLBY NR OFF/ B/ C REC LEVEL 0 10 1 9 2 8 3 7 54 6 PHONES DIRECTION POWER MODE O / p/ ./ RELAY !PLAY U STOPMUTE/SEARCH EJECT NORMAL HIGH DUBBING A #B !PLAY U STOPMUTE/SEARCH REC/PAUSE EJECT RESETRESETDIRECTION PLAYBACK DECK A RECORD/PLAYBACK DECK B SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection To search for the next selection When the #tape running indicator is lit: When the @tape running indicator is lit: . MUTE/SEARCH ! MUTE/SEARCH Press simultaneously. Press simultaneously. To search for the beginning of the current selection When the #tape running indicator is lit: When the @tape running indicator is lit: ! MUTE/SEARCH . MUTE/SEARCH Press simultaneously. Press simultaneously. To search for the selection located before the current selection OOperate the following buttons when the beginning of the current selection is being played. When the #tape running indicator is lit: When the @tape running indicator is lit: ! MUTE/SEARCH . MUTE/SEARCH Press simultaneously. Press simultaneously. Notes OThe blank interval between selections must be at least 4 seconds long. OSelection search may not operate properly with tapes recorded at a low recording level or which have excessive noise. ENGLISHENGLISH NATURAL SOUND STEREO DOUBLE CASSETTE DECK K-902 DOLBY NR OFF/ B/ C REC LEVEL 0 10 1 9 2 8 3 7 54 6 PHONES DIRECTION POWER MODE O / p/ ./ RELAY !PLAY U STOPMUTE/SEARCH EJECT NORMAL HIGH DUBBING A #B !PLAY U STOPMUTE/SEARCH REC/PAUSE EJECT RESETRESETDIRECTION PLAYBACK DECK A RECORD/PLAYBACK DECK B MODE RELAY PLAYBACK - To play DECK A and DECK B sequentially Load the cassette tapes into DEC...