Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. 1000IMMCREMTS LVT0635-001A[U, UX] 601-828800-010 PRECAUTIONS: • Never open the cabinet under any circumstances. Never operate this product with the cabinet removed. Any repairs of internal adjustments should be made only by a trained service technician. • Do not touch the recorder with wet hands. If any liquid enters the recorder cabinet, take the recorder to a trained service technician for inspection. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. A THE LIGHTNING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF "DANGEROUS VOLTAGE 1 INSIDE THE PRODUCT. CAUTION RISK OF ELECTRIC SHOCKl DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REH0VE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. A THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. SEE MARKING ON BOTTOM/BACK OF PRODUCT. PREPARATION FOR USE Please keep all information forfuture reference. AC POWER OPERATION Setting the Voltage selector Before inserting the plug into the AC outlet, make sure to set the voltage selector (AC 110 V—127 V/220 V-240 V) to the voltage that is appropriate for your area. Note: • For this unit, the AC plug adaptor is provided. If required, use it. Connection of power Connect one end of the supplied AC power cord to the AC IN jack, and the other end, to household AC outlet. Notes: • When you do not use the unit for long period of time, be sure to unplug the unit from the AC outlet. • Even if the batteries are loaded, the unit switches over to AC power whenever you plug it into an AC power source. DC POWER OPERATION Open the battery compartment and install four SUM-1 (“D” size,HP2, R20) with + and - poles facing in the correct directions as indicated in the battery compartment. Notes: Incorrectly using the batteries can cause them to leak or burst, and may damage the unit. Note the following; • Do not mix new batteries with old ones. • Remove the batteries when you do not plan to use the unit for a month or more. CASSETTE OPERATION PLAYBACK RADIO OPERATION Set the FUNCTION selector to RADIO. Set the BAND selector to the desired band. Tune to the desired station by turning the TUNING control. Adjust the VOLUME control to your comfortable listening level. To turn the radio off, the FUNCTION selector to C1) TAPE. Notes: • For FM and SW reception, extend the telescopic antenna and turn its direction at which the reception becomes optimal. • For MW reception, a ferrite-bar antenna is built-in. Since this antenna is direction oriented, turn the entire unit to a direction at which the reception becomes optimal. FINE TUNING control When tuning SW broadcast, use the FI NE TUNING control for precise tuning. Press the M/A STOP/EJ button to open the cassette compartment door. Insert a cassette with the exposed portion facing upward. Close the cassette compartment door by hand. Set the FUNCTION selector to (!) TAPE. Press the ■< PLAY button. Adjust the VOLUME control to your comfortable listening level. To stop the tape, press the M/± STOP/EJ button. To eject the cassette, press the M/± STOP/EJ button again. FAST FORWARD AND REWIND 1. Press the ■+* FF button to rapidly advance the tape forward. 2. Press the ►► REW button to rapidly wind the tape backward. RECORDING FROM THE RADIO 1. Set the FUNCTION selector to RADIO and turn to the desired station. 2. Press the B/± STOP/EJ button to open the cassette compartment door. 3. Insert a cassette with the exposed portion facing upward. 4. Close the cassette compartment door by hand. 5. Press the ■■ PAUSE button, and then press the • REC button H PLAY button will engage simultaneously). 6. To start recording, press the II PAUSE button to release. 7. To stop recording, press the M/± STOP/EJ button. To eject the cassette, press the button again. RECORDING FROM BUILT-IN MICROPHONE Set the FUNCTION selector to 0 TAPE. Press the B/± STOP/EJ button to open the cassette compartment door. Insert a cassette with the exposed portion facing upward. Close the cassette compartment door by hand. Press the IIPASUE button and then press the • REC button H PLAY button will engage simultaneously). To start recording, press the II PAUSE button to release. To stop recording, press the M/± STOP/EJ button. To eject the cassette, press the button again. Notes: • The recording level is adjusted automatically. The VOLUME level does not affect the recording level. • If the sound on playback is distorted, the microphone may have been placed too near the recording source. Re-position the unit and run through the above procedure again. AUTOMATIC STOP When the tape reaches the end during playback, ...