Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking Reception is activated with Regionalization set to “on.” Switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak. Mode 3 Neither the AF indicator nor the REG indicator lights up. Network-Tracking Reception is deactivated. 10 The same programme can be received on different frequencies. Programme 1 broadcasting Programme 1 on frequency A broadcasting on frequency E Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Programme 1 broadcasting on frequency D Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, tape or other connected components). • Standby Reception will not work if you are listening to an AM station. TA Standby Reception TP When you press TP RDS while listening RDS to an FM station, the TP indicator is lit during reception of a TP (Traffic Programme) station and the TA standby mode is engaged. • When the station being received is not a TP station, the TP indicator flashes. Press . or 4 to engage the TA standby mode. “SEARCH” appears on the display, and TP station search starts. When a TP station is tuned into, the TP indicator is lit. 7If you are listening to a tape or other connected components and wish to listen to a TP station, press TP RDS to enter the TA standby mode. (The TP indicator lights up.) If a traffic programme starts broadcasting while the TA standby mode is active, “TRAFFIC” appears and the playback source changes to the FM band. The volume increases to the preset TA volume level (see page 14) and the traffic programme can be heard. To deactivate the TA standby mode, press TP RDS again. PTY Standby Reception PTY When you press PTY while listening to an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 12 flashes for 5 seconds. • When the station being received is not a PTY station, the PTY indicator flashes. Press . or 4 to engage the PTY standby mode. “SEARCH” appears on the display, and PTY station search starts. When a PTY station is tuned into, the PTY indicator is lit. 7If you are listening to a tape or other connected components and wish to listen to a selected PTY broadcast, press PTY to enter the PTY standby mode. (The PTY indicator lights up.) If the selected PTY programme starts broadcasting while the PTY standby mode is active, the selected PTY name appears and the playback source changes to the FM band. The selected PTY programme can then be heard. To deactivate the PTY standby mode, press PTY again. ENGLISH 11 ENGLISH Selecting your favorite programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 23.) Searching your favorite programme You can search one of your 6 favorite programme types stored in memory. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search your favorite programme type, see page 13. 1 2 3 POP M ROCK M EASY M 4 5 6 CLASSICS AFFAIRS VARIED 2 Select “PTY STBY” (standby) if not shown on the display. 3 Select one of twenty-nine PTY codes. (See page 15.) Selected code name appears on the display and is stored into memory. 4 Press SEL (select) to finish the setting. To store your favorite programme types 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 23.) 2 Select “PTY SRCH” (search) if not shown on the display. 3 Select one of twenty-nine PTY codes. (See page 15.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display. 12 4 Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want. 7 8 9 101112 The selected code name and “MEMO” (memory) appear alternately on the display. 5 Press SEL (select) to finish the setting. To search your favorite programme type 1 Press and hold PTY (programme type) for more than 1 second while listening to an FM station. PTY The last selected PTY code appears. 2 Select one of the PTY codes stored in the preset number buttons (1 to 6). 7 8 9 101112 Ex.: When “ROCK M” is stored in preset number button 2 PTY search for your favorite programme starts after 5 seconds. • If there is a station broadcasting a programme of the same PTY code as you selected, that station is tuned into. • If there is no st...