Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
To eliminate interference you can try one or more of the following corrective measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the radio or TV. • Use outlets on different electrical circuits for the equipment and the radio or TV. Consult your dealer or an experienced radio/television technician if the problem still exists. Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s warranty and void your FCC authorization to operate it. This Class B digital apparatus complies with Canadian ICES-003. Getting Started Thank you for purchasing the iHome iP15 Color Change Speaker System for your iPhone or iPod. Designed specifically to work with your iPhone or iPod, this system provides high quality audio performance combined with relaxing colored mood lights. Please read this instruction carefully before operating the unit and keep it for future reference. Install iPhone iPod Insert Your iP15 comes with 5 removable inserts for popular iPod and iPhone models to ensure your iPhone/iPod fits properly in the Dock (please see the table in Quick Start Section). If there is no insert for your particular iPhone or iPod model, you can still dock your iPhone or iPod safely provided you always dock and remove it from the dock gently and carefully. Connect Power Plug the AC adaptor cable into the AC Adaptor Jack on the back of the unit and the other end into a standard 120V wall outlet. Controls and Indicators Controls and Indicators Top panel color iPhone/iPod Dock Select insert and dock iPhone/iPod Power Button Raise Volume Button Press to turn unit ON or OFF Raise volume Color Button Lower Volume Button Press to cycle color settings Lower volume Back panel DC 7.5V 2500mA Line-in Jack Use audio cable (not included) to connect aux audio source 1 iP15 Quick Start iP15 Quick Start 2: inserts Attach AC adaptor cable to jack on back of the iP15 and plug the other end into a wall socket to play and charge iPhone/iPod. Insert playing iPhone/iPod into the dock (must not be in a “skin” or case). iPhone/iPod will charge while docked. Press the Power Button on the iP15 to listen to your iPhone/iPod. 3: iPhone/iPod Select the dock insert for your iPhone/iPod model from the table below and place insert in dock. To remove insert, place thumbnail in slot and gently pull upwards. iPhone 3G insert 15 iPhone 3G/3GS iPod touch 2G insert 16 iPod touch 2G/3G iPhone 4 insert 19 nano 6G/touch 4G insert 20 nano 6G/ iPod touch 4G iPhone 4 nano 5G insert 18 nano 5G RESETRESETDC 7.5V 2500mA Use this insert For this iPhone / iPod NOTE: If you do not have an insert for your iPhone/iPod, please visit or call iHome toll free at 800-288-2792 to purchase one. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 2 Playing and Charging your iPhone/iPod Playing and Charging your iPhone/iPod 1. Place proper insert for your iPhone or iPod (see insert table on Quick Start Section) in Dock, then gently dock playing iPhone or iPod. The unit will turn on and you will hear your music. When docked, iPhone or iPod will charge until fully charged. The iPhone or iPod will not overcharge. 2. If iPhone or iPod is not in play mode, press the Button on the iP15 to turn on the unit and press play on your iPhone or iPod. The power on indicator will light up to show the iP15 is on. 3. Press the or Button Volume to adjust the volume. 4. To switch off the unit, press the Button again. Color Change Mode There are 5 color settings. Press the Color Button to cycle through them. The settings are: slow color change (default), fixed color (press the Color Button when the desired color is showing to select that color), pulse to music, fast color change and light off. Using the Line-in Jack 1. Plug one end of an audio patch cord (available at into the headphone or line-out jack on your audio device and the other end of the patch cord into the iP15 Line-in Jack located on the back of the unit. 2. Press the Button on the iP15 to play your audio device. The power on indicator will light up to show the iP15 is on. Place your device in play mode. 3. Press the or Button to adjust the volume. 4. To switch off the unit press the Button again. Remember to turn off your audio device, too. NOTE: DO NOT play a line-in device while iPhone/iPod is playing or you will hear both audio sources at once. 3 A Consumer Guide to Product Safety A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured t...