Assessments - 3, GPA: 4.3
(
)
)
|
Fotos e especificações Husqvarna 128C |
Facilidade de uso
Always stop the engine and let it cool for a few minutes before refuelling. When refueling, open the fuel cap slowly so that any excess pressure is released gently. Tighten the fuel cap carefully after refueling. Always move the machine away from the refueling area before starting. S Clean the area around the fuel cap. Contamination in the tank can cause operating problems. S Ensure that the fuel is well mixed by shaking the container before filling the tank. Min.3m 545196741 Rev. 2 4/30/09 English- ---11 STARTING AND STOPPING Checkbeforestarting WARNING: When the engine is started with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately. S Never start the machine indoors. Exhaust fumes can be dangerous if inhaled. S Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. S Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord. S Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. S Never use the machine without a guard nor with a defective guard. Startingandstopping WARNING: The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come loose and cause personal injury. Always move the machine away from the refueling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object. Make sure no unauthorized persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 meters. Cold engine Primer bulb: Press the primer bulb 10 times until fuel begins to fill the bulb. The primer bulb need not be completely filled. Choke: Move the blue engine choke lever over to the closed position. Starting Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Firmly grip the starter rope handle with your right hand. DO NOT squeeze throttle trigger. Slowly pull out the cord until you feel some resistance (the starter pawls grip); then quickly and powerfully pull the cord. Never wrap the starter cord around your hand. Repeat pulling the cord until the engine attempts to start. Move the blue engine choke lever to the . position. Pull starter rope until engine runs. Move the blue engine choke lever to the opened position. 545196741 Rev. 2 4/30/09 English- ---12 STARTING AND STOPPING NOTE:Ifenginedies,returnblueenginechokelevertotheclosedpositionandrepeatstartingsteps. CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine. Warm engine With a warm engine, move the blue engine choke lever to the . position. Pull starter rope until engine runs. Move the blue engine choke lever to the opened position. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with damaged spark plug cap. 545196741 Rev. 2 4/30/09 Stopping Stop the engine by pushing and holding the stop switch in the STOP position until the engine stops. WARNING: When theengineis started with the choke in the closed position the cutting attachment will start to rotate immediately. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. English- ---13 WORKING TECHNIQUES General working instructions IMPORTANT! This section describes the basic safety precautions for working with trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your servicing dealer. Avoid all usage which you consider to be beyond your capability. You must understand the difference between forestry clearing, grass clearing and grass trimming before use. Basic safety rules 1. Look around you: S To ensure that people, animals or other things cannot affect your control of the machine. S To ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out by the cutting attachment. S CAUTION! Do not use the machine unless you are able to call for help in the event of an accident. 2. Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc. 3. Make sure you can mo...
Este manual também é adequado para os modelos :Clippers - 128L (579.69 kb)