Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Symbols WARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: •Approved hearing protection •Approved eye protection This product is in accordance with applicable EC directives. Cutting tool. Do not touch the tool without first switching off the engine. This machine is not electrically insulated. If the machine touches or comes close to high-voltage power lines it could lead to death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the greater the distance electricity can jump. Electricity can also travel through branches and other objects, especially if they are wet. Always keep a distance of at least 10 m between the machine and high-voltage power lines and/ or any objects that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work. This machine can be dangerous! The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres. Arrows which show limits for handle positioning. Always wear approved protective gloves. Wear sturdy, non-slip boots or shoes. Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label. Other symbols/decals on the machine refer to special certification requirements for certain markets. The engine is switched off by moving the stop switch to the stop position. NB! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. Always wear approved protective gloves. Regular cleaning is required. Visual check. Protective goggles or a visor must be worn. Contents KEY TO SYMBOLS Symbols ....................................................................... 2 CONTENTS Contents ...................................................................... 3 Note the following before starting: ................................ 3 INTRODUCTION Dear Customer, ............................................................ 4 WHAT IS WHAT? What is what? .............................................................. 5 GENERAL SAFETY PRECAUTIONS Important ...................................................................... 6 Personal protective equipment ..................................... 6 Machine.s safety equipment ........................................ 7 ASSEMBLY Fitting the main body ................................................... 9 Connecting throttle cable and stop switch wires .......... 9 Fitting the handle ......................................................... 9 Adjusting the harness .................................................. 10 FUEL HANDLING Fuel safety ................................................................... 11 Fuel .............................................................................. 11 Fuelling ........................................................................ 12 STARTING AND STOPPING Check before starting ................................................... 13 Starting and stopping ................................................... 13 WORKING TECHNIQUES General working instructions ....................................... 14 Transport position ........................................................ 15 MAINTENANCE Carburettor ................................................................... 17 Muffler .......................................................................... 17 Cooling system ............................................................ 18 Spark plug .................................................................... 18 Air filter ......................................................................... 18 Gear ............................................................................. 19 Cleaning and lubrication .............................................. 19 Maintenance schedule ................................................. 20 TECHNICAL DATA Technical data .............................................................. 21 EC-declaration of conformity ........................................ 22 Note the following before starting: Please read the operator’s manual carefully. WARNING! Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection. WARNING! Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorize...