Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
FIRST AID KIT A first aid kit should be close at hand. The machine’s protective equipment This section describes the hedge trimmer’s protective equipment, its function and how checks and maintenance are carried out to ensure that it operates correctly. (See the chapter ”What is what” to locate where this equipment is positioned on your machine.) WARNING! ! ! Never use a hedge trimmer with defective protective equipment. Follow the control, maintenance and service instructions described in this section. 1. Throttle trigger lock The throttle trigger lock is designed to prevent the throttle from accidentally being engaged. The trigger (A) can only be pressed in, if the lock (B) is held in (= the C operator holding the " handle). When the grip on the handle is released the throttle and the throttle trigger lock return to their original positions. This takes place via two independent return spring systems. This means that the throttle is automatically locked in the idling position. 2. Stop switch AB The stop switch (C) should be used to stop the engine. 3. Hand guard The hand guard (D) prevents the operator’s hands from coming into contact with the blades. For example, if the operator should loose his grip on the front handle. D 4 – English SAFETY INSTRUCTIONS 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibration- free and comfortable use as possible. The hedge trimmer’s vibration damping system reduces the transfer of vibrations between the engine unit/blades and the hedge trimmer’s handles. The engine body including the blades is suspended on the handlebar system via a four springs. ! ! WARNING! Over exposure to vibrations can result in blood-vessel or nerve injury to persons suffering with blood circulation problems. Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples of such symptoms are ”numbness”, lack of feeling, ”tickling”, ”pricking”, ”pain”, lack of or a reduction in normal strength, changes in the colour of the skin or its surfaces. These symptoms normally appear in the fingers, hands or wrists. 5. Muffler The muffler is designed to give the lowest possible noise level and to direct the engine‘s exhaust fumes away from the operator. Muffler fitted with catalytic converter is also designed to reduce harmful exhaust components. In countries that have a warm and dry climate the risk of fire is obvious. We have therefore fitted certain mufflers with a spark arrest screen. Make sure that your muffler is fitted with this kind of screen. It is extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (See the section “Control, maintenance and service of the machine‘s safety equipment“.) ! ! WARNING! Mufflers fitted with catalytic converters become extremely hot during use and after stopping. This also applies at idling speeds. Contact can result in burns to the skin. Be observant to the risk of fire! ! ! WARNING! Bear in mind that exhaust fumes: • contain carbon monoxide, which can cause carbon monoxide poisoning. Therefore never start or run the machine indoors. • are hot and can contain sparks that can cause fires. Never start the machine indoors or close to inflammable material. 6. Blade guard The blade guard (A) is intended to protect against any part of the body coming into contact with the blades (B). BA English – 5 SAFETY INSTRUCTIONS Control, maintenance and service of the hedge trimmer’s protective equipment IMPORTANT INFORMATION • All service and repairs to the machine require special training. • This applies especially to the machine‘s safety equipment. If the machine does not meet any of he controls listed below you should contact your service workshop. • The purchase of one of our products guarantees that professional repair and servicing will be carried out on it. If the point of purchase is not one of our servicing dealers, please ask for details of the closest service workshop. 1. Throttle trigger lock • Check that the throttle is locked in the “idling position“ when the throttle trigger lock is in its original position. • Press in the throttle trigger lock and make sure it returns to its original position when released. • Ensure that the throttle and throttle trigger lock move easily and that their return spring systems function. • See the section ”Start”. Start the hedge trimmer and apply full throttle. Release the throttle and check that the blades stop and remain at a standstill. If the blades rotate with the throttle in the idling position then the carburettor’s idling setting must be checked. See chapter ”Maintenance”. WARNING! ! Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop. ! ! WARNING! Always stop the engine before starting ...
Este manual também é adequado para os modelos :Clippers - 225H60 (626.28 kb)
Clippers - 225H75 (626.28 kb)