Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
When the appliance is fully charged, it has an operating time of up to 50 minutes. When the batter y status indicator flashes red, the batter y is running low (approx. 10 minutes of operating time left) and you need to recharge the appliance. 1 2 Insert the small plug into the charging stand. Put the appliance in the charging stand. The battery status indicator flashes green to indicate that the , appliance is charging. Note:The battery status indicator of BG2028, BG2026, BG2025 and BG2024 looks different, but works in the same way. ,, When the appliance is fully charged, the battery status indicator lights up green continuously. Note: If the fully charged appliance is still in the plugged-in charging stand after 30 minutes, the battery status indicator goes out to save energy. Using the appliance Take your time when you first start to shave sensitive areas. You have to acquire practice with the appliance. Your skin also needs some time to adjust to the procedure. You can use the appliance wet or dry to shave or trim hair on all parts of the body below the neckline. Do not use this appliance to shave or trim facial hair or scalp hair. Trimming BG2025 and BG2024 come with trimming comb 1. BG2038, BG2036, BG2028 and BG2026 come with trimming combs 1, 2 and 3. A trimming comb allows you to cut hair to a specific length (see the table below). If your appliance comes with 3 combs, start trimming with trimming comb 3 to acquire practice with this appliance. Trimming comb Hair length after trimming 1 3mm/0.11 inch 2 5mm/0.19 inch 3 7mm/0.27 inch 1 Snap the appropriate trimming comb onto the appliance. Make sure the teeth of the comb point in the direction in which you are going to move the appliance. -- When you move the appliance towards you, the teeth have to point towards you. 6 English EnGlish -When you move the appliance away from you, the teeth have to point away from you. 2 3 Press the on/off button to switch on the appliance. Move the appliance against the direction of hair growth. Note: Make sure that the flat part of the trimming comb is always fully in contact with the skin. shaving 1 If a trimming comb is still attached, remove it. Note:You can either push the trimming comb off the appliance or pull it off, depending on how the comb is placed on the appliance. 2 3 4 Press the on/off button once to switch on the appliance. Place the shaving unit on the skin. Move the appliance against the direction of hair growth with one hand, while you stretch the skin with the other hand. Note: Make sure that the shaving unit is always fully in contact with the skin. trimming and shaving tips -If the hairs are longer than 10mm, you can trim them first with trimming comb 1 to a length of 3mm to make shaving easier. -You get the best trimming results when the skin and hair are dr y. -You can use the appliance to shave in the shower or bath.To ensure easier gliding, apply some shaving foam or shower gel to your skin. EnGlish shaving with the back shaving attachment (BG2036/BG2038 only) 1 Press and hold the release button (1) and open the back shaving attachment (2). 2 Place the bottom of the appliance in the lower part of the holder of the back shaving attachment.Then press the top against the top part of the holder until it locks into position with a click. 3 Shave your back by moving the back shaving attachment with the appliance up and down by its handle. Note: For your convenience, the back shaving attachment can be folded to different angles. 4 To remove the appliance from the back shaving attachment, pull the topof the appliance towards you until it unlocks from the holder. EnGlish 5 To close the back shaving attachment, press and hold the release button (1) and push the handle against the holder (2). Cleaning Clean the appliance after ever ...
Este manual também é adequado para os modelos :Clippers - BG2024/15 (11.3 mb)
Clippers - BG2038/41 (11.3 mb)
Clippers - BG2028/42 (11.3 mb)