Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Using the appliance Clipping with the hair clipping comb attachment Note: Make sure your hair is clean and dry. Do not use the appliance on freshly washed hair. 1 2 Comb your hair with a styling comb in the direction of hair growth. (Fig. 4) Slide the comb attachment into the guiding grooves of the appliance (‘click’). (Fig. 5) Make sure that the comb attachment has been properly slid into the grooves on both sides. 3 To set the comb attachment to the desired hair length, press the adjustment button (1) and slide the comb attachment to the desired hair length setting (2). (Fig. 6) Hair length settings With the hair clipping comb attachment attached, the appliance has 7 different hair length settings: Hair length setting Resulting hair length 1 3mm 2 6mm 3 9mm 4 12mm 5 15mm 6 18mm 7 21mm Slide the on/off switch to the ‘on’ position. Move the appliance through the hair slowly. Tips: 45 -Star t to clip at the highest setting of the comb attachment and reduce the hair length setting gradually. -Write down the hair length settings you selected to create a cer tain hairstyle as a reminder for future clipping sessions. -To clip in the most effective way, move the appliance against the direction of hair growth. (Fig. 7) -Tr y different directions (upward, downward or across), because hair doesn’t all grow in the same direction. -Make overlapping passes over the head to ensure that the appliance catches all the hairs that need to be cut. -Make sure that the flat par t of the hair clipping comb attachment is fully in contact with the scalp to obtain an even cutting result. -To achieve a good result with curly, sparse or long hair, you can use a comb to guide the hair towards the appliance. -Regularly remove cut hair from the comb attachment. If a lot of hair has accumulated in the comb attachment, remove it from the appliance and blow and/or shake the hair out of it. Contouring without hair clipping comb attachment You can use the appliance without comb attachment to cut your hair ver y close to the skin (0.8mm) or to contour the neckline and the area around the ears. Note:When you use the appliance without comb attachment, it cuts the hair very close to the skin. 1 2 3 4 5 6 To remove the comb attachment, press the adjustment button (1) and pull the combattachment off the appliance (2). (Fig. 8) Before you start to contour the hairline round the ears, comb the hair ends over the ears. Tilt the appliance in such a way that only one edge of the cutting element touches the hairends. (Fig. 9) Only cut the hair ends.The hairline has to be close to the ear. To contour the neckline and sideburns, turn the appliance and make downward strokes. (Fig. 10) Move the appliance slowly and smoothly. Follow the natural hairline. Trimming with the beard trimming comb attachment 1 2 Always comb your beard or moustache with a fine comb before you start to trim. Slide the comb attachment into the guidinggrooves of the appliance (‘click’). (Fig. 11) Make sure that the comb attachment has been properly slid into the grooves on both sides. 3 To set the comb attachment to the desired hair length, press the adjustment button on the back of the appliance (1) and slide the comb attachment to the desired hair length setting (2). (Fig. 12) Beard hair length settings With the beard trimming comb attachment attached, the appliance has 7 different hair length settings: Hair length setting Resulting hair length 1 2mm 2 4mm 3 6mm 4 8mm 5 10mm 6 12mm 7 14mm 4 Slide the on/off switch to the ‘on’ position. Place the beard trimming comb attachment on the skin and move the appliance slowly over the beard. Tips: -When you trim your beard for the first time, star t at the highest hair length setting and reduce the hair length setting gradually. -To trim in the most effective way, move the appliance against the direction of hair growth. (Fig. 13) -Do not move the appliance too fast. Make smooth and gentle movements. Make sure the flat surface of the comb attachment always stays in contact with the skin. -Regularly remove cut hair from the comb attachment. If a lot of hair has accumulated in the comb attachment, remove the comb from the appliance and blow and/or shake the hair out of it. Trimming at the unique ‘stubble look setting’ 1 To create a ‘stubble look’, trim with the beard trimming comb attachment set to hair length setting 1. (Fig. 14) Trimming without the beard trimming comb attachment Use the appliance without beard trimming comb attachment to trim and contour your beard and remove single hairs. 1 2 To remove the comb attachment, press the adjustment button (1) and pull the combattachment off the appliance (2). (Fig. 8) Make well-controlled movements and touch the hair lightly with the cutting element. Note:To contour your beard, hold the appliance with the cutting element pointing upwards (Fig. 15). Cleaning Do not use abrasives, scourers, compressed air or liquids such as alcohol, petrol or acetone to clean the appliance. Only clean the applianc...