Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
Batteries discharge at a rate of about 1% per day. Charge the battery every six months even if it is unused to maximize battery life. Do not tape the trigger in the “ ON” position and leave the tool unattended as this may discharge the battery to a point where it will no longer be able to recharge. Store your battery pack in a cool, dry place. Do not store it in a place where the temperature will exceed 120° F (50°C) such as a vehicle or metal building during the summer. High temperatures will overheat the battery pack, reducing battery life. If it is stored for several months, the battery pack will gradually lose its charge. One (1) to three (3) cycles of charging and discharging through normal use will restore the capacity of the battery pack. During the life of the battery pack the operating time between charges becomes shorter. If the operating time becomes extremely short after a proper charge, the usable life of the battery has been reached and it should be replaced. Cleaning • After each use, remove the battery pack and any build up of grass or debris from the blade area. • Remove and clean the protective guard cover as described on page 5. • Clean dust and debris from the charger and the hand held trimmer. Keep unit handles clean, dry and free of oil or grease. Use only a dry lint free cloth to clean the unit, battery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. • Never use flammable or combustible solvents around unit. Never immerse hand held trimmer, battery pack or charger in water or any other liquid. NOTE: DO NOT CLEAN UNIT UNDER RUNNING WATER. ALWAYS USE A DRY CLOTH. This product contains nickel- cadmium battery. Must be disposed of properly. Local, state, or federal laws may prohibit disposal of Nickel-Cadmium batteries in ordinary trash. Please consult your Yellow Pages or local recycling center for more information. Re-Ordering PartsTo re-order replacement parts call FANTOMat 1 (800) 275-9251. Ni-CdBatteryXBAT194Blade SetsXBLD194Do not attempt to disassemble the battery pack or remove any of its components. Also, never touch both terminals with metal objects and/or body parts, as short circuit can result. Failure to comply with these warnings could result in fire and/or serious injury. To reduce the risk of explosion, NEVERburn a battery pack even if it is damaged, dead or completely discharged. 37. Use only those accessories and attachments that have been found to be acceptable for use with the product. The use of any other accessory or attachment may increase risk of injury. BATTERY/CHARGER38. Make sure that you use the correct battery pack when recharging your hand held trimmer. DoNOTcharge appliance in rain, or in wet locations. 39. Make sure that the battery pack surface is clean and dry before inserting the battery back into the hand held trimmer. 40. After recharging the battery pack, unplug the charger from the electrical outlet and remove the battery pack from the charger. 41. Always disconnect battery pack from unit before making any adjustments, changing blades or storing the tool. Such preventive measures reduce the risk of starting the tool accidentally. 42. When battery pack is not in use in the trimmer, do not allow the battery contacts to touch and type of metal objects such as paper clips, coins, keys, nails, screws, rings and bracelets, etc. that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire. 43. After recharging the battery pack, unplug the charger from the electrical outlet and remove the battery pack from the charger. 44. Charge battery pack in temperatures above 40°F(50°C) and below 122°F( 50°C). Allow battery pack to return to room temperature before attempting to recharge. This is important to prevent serious damage to the battery cells. 45. Store the hand held trimmer and the battery pack in locations where the temperatures do not go below 40°F(4°C) and above 122°F( 50°C) .52. Use only the following type battery XBAT194. 4 GETTING TO KNOW YOUR HAND HELD TRIMMER Technical Specifications Voltage: 4.8 V DC Power: 20 Watts 1. Blade Cover 2. Blade ( x 3 Sets) 3. Trigger Safety Interlock 4. On/Off Trigger 5. Charging Base AD-0730-UL (8) 6. Charging Jack Receptacle 7. LED Charging Light 8. Charging Adapter 9. Ni CdBattery 10. Charging Jack 11. Battery Compartment 12. Battery Release Buttons 13. Protective Blade Guard 14. Handle Illustrations may differ from actual product. NOTE: Hand held trimmer is shipped with the batteries uncharged. Charging of the unit for 10 hours prior to first use is required. OPERATING INSTRUCTIONS 1. Fully discharge the battery (by running the unit) and then recharge the battery for 10 hours. 2. Remove any build up of debris, and wipe all exterio...
Este manual também é adequado para os modelos :Clippers - PT194H (732.01 kb)