Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions: Ensure that the power source to be used is the same as the voltage requirements of the product. Never immerse the power cord or the appliance in any form of liquid and do not use near bath tubs, basins or other vessels containing water. This appliance is not intended to use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with this appliance. This hair clipper is for household use only, and not for animal clipping or shearing. The hair clipper may be plugged into any 230/240V power outlet. It should not be left unattended when plugged in. Always switch the hair clipper off then switch off and unplug from the power outlet when not in use and before cleaning. Disconnect by gripping the plug and do not pull the cord. Do not place or store the hair clipper where it can fall or be pulled into a bath tub or sink. If the hair clipper falls into water, unplug it immediately. Do not reach into the water. The hair clipper has arcing or sparking parts inside. Do not use in areas where petrol, paints, aerosols, oxygen or other inflammable substances are used or stored. Keep the power cord and unit away from hot or heated surfaces. Do not pull, twist or wrap the power cord around the casing, when using or storing the hair clipper. Periodically check the cord for signs of wear. Do not operate the hair clipper if it has been dropped or damaged in any manner. regularly inspect the power cord, plug and actual appliance for any damage. If found damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest authorised Kambrook Service Centre for examination, replacement or repair. please call 1300 139 798 for service centre details. Never drop or insert any object into any opening, as this may cause an electrical hazard. Always switch the hair clipper OFF before putting down on any surface. To avoid injury, do not use the hair clipper with a damaged or broken comb nor with teeth missing from the blades. Use the hair clipper only as described in this instruction book. The use of attachments not recommended by the manufacturer may cause a hazard. Keep blades regularly oiled and clean blades after each use. If the appliance is connected to an extension cord or power board then the extension cord or power board should be positioned so that it is not subject to splashing or contact with moisture. The installation of a residual current (RCD) is recommended to provide additional safety protection when using electrical appliances. It is also advisable that an RCD with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the bathroom. Consult with your electrician for professional advise. Adjustable blade control lever for close trimming and finishing off (particularly around the neck and ears) On/Off switch Easy hold grip Barber’s comb – for precise cutting control featureS of your KambrooK HaIr ClIpper Blade guard – protects blade when not in use Barber’s scissors with stainless steel blades Blade brush – for cleaning the cutting blades after use Lubricating oil – keeps blades in optimal condition Trim guide #1 Trim guide #2 Trim guide #3 Trim guide #4 for short hair for medium hair for medium for longer hair - long hair adjuStable lever CloSe long The adjustable lever adds versatility to your hair clipper by allowing you to gradually adjust the closeness of your cut without using an attachment comb. When the lever is in the uppermost position, the blade will give you the closest cut. To increase the cutting length, push the lever downward gradually. The lever extends the variety of lengths that can be achieved with each attachment comb, by using the varying cutting edges with each attachment comb. attaCHment CombS Attachment combs should be fitted to the hair clipper by placing the top edge (comb edge) of the attachment comb over the top of the cutting blades. Gently lift the tab at the other end of the attachment comb and push down until a click is heard. Attachment Comb #1 leaves hair approximately 3mm (1/8”) in length Attachment Comb #2 leaves hair approximately 6mm (1/4”) in length Attachment Comb #3 leaves hair approximately 9mm (3/8”) in length Attachment Comb #4 leaves hair approximately 12mm (1/2”) in length uSIng your KambrooK HaIr ClIpper before uSe Before starting to cut your hair, follow these simple steps . . . 1. Make sure the blades are clean and well oiled. Unwind the cord to its full length, ensure that the on/off switch is in the OFF position, and plug the clipper into a 230/240V power outlet. You may then proceed to turn the power on. 2. Place a towel around the neck of the person who’s hair is being cut to prevent hair from falling inside the shirt collar. 3.Position the person i...