Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Auto sets memory multiplier according to memory SPD data. (Default: Auto) Memory Frequency(Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the BCLK Frequency(Mhz) and System Memory Multiplier settings. Performance Enhance Allows the system to operate at three different performance levels. Standard Lets the system operate at its basic performance level. Turbo Lets the system operate at its good performance level. (Default) Extreme Lets the system operate at its best performance level. DRAM Timing Selectable (SPD) Quick and Expert allows the Channel Interleaving and Rank Interleaving items to be configurable. Options are: Auto (default), Quick, Expert. Profile DDR Voltage When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2, this item will display the value based on the SPD data on the XMP memory. (Note) This item appears only if you install a memory module that supports this feature. Profile QPI Voltage The value displayed here is dependent on the CPU being used. Channel Interleaving Options are: Auto (default), 1~6. Rank Interleaving Options are: Auto (default), 1~4. >>>>> Channel A/B Timing Settings CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Channel A Timing Settings Item Help Menu Level ... >>>>> Channel A Standard Timing Control x CAS Latency Time 9 Auto x tRCD 9 Auto x tRP 9 Auto x tRAS 24 Auto >>>>> Channel A Advanced Timing Control x tRC 33 Auto x tRRD 4 Auto x tWTR 5 Auto x tWR 10 Auto x tWTP 21 Auto x tWL 7 Auto x tRFC 74 Auto x tRTP 5 Auto x tFAW 20 Auto x Command Rate (CMD) 1 Auto >>>>> Channel A Misc Timing Control x B2B CAS Delay - Auto x Round Trip Latency 46 Auto ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults >>>>> Channel A/B Standard Timing Control CAS Latency Time Options are: Auto (default), 6~15. tRCD Options are: Auto (default), 1~15. tRP Options are: Auto (default), 1~15. tRAS Options are: Auto (default), 1~31. >>>>> Channel A/B Advanced Timing Control tRC Options are: Auto (default), 1~63. tRRD Options are: Auto (default), 1~7. tWTR Options are: Auto (default), 1~31. tWR Options are: Auto (default), 1~15. tWTP Options are: Auto (default), 1~31. tWL Options are: Auto (default), 1~10 tRFC Options are: Auto (default), 1~255. tRTP Options are: Auto (default), 1~15. tFAW Options are: Auto (default), 1~63. Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc Timing Control B2B CAS Delay Options are: Auto (default), 1~31. Round Trip Latency Options are: Auto (default), 1~255. >>>>> Channel A/B Turnaround Settings CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Channel A Turnaround Settings Item Help Menu Level ... >>>>> Channel A Reads Followed by Reads x Different DIMMs 6 Auto x Different Ranks 5 Auto x On The Same Rank 1 Auto >>>>> Channel A Writes Followed by Writes x Different DIMMs 6 Auto x Different Ranks 6 Auto x On The Same Rank 1 Auto ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults >>>>> Channel A/B Reads Followed by Reads Different DIMMs Options are: Auto (default), 1~8. Different Ranks Options are: Auto (default), 1~8. On The Same Rank Options are: Auto (default), 1~2. >>>>> Channel A/B Writes Followed by Writes Different DIMMs Options are: Auto (default), 1~8. Different Ranks Options are: Auto (default), 1~8. On The Same Rank Options are: Auto (default), 1~2. . Advanced Voltage Settings CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Advanced Voltage Settings Item Help Menu Level .. ****** Mother Board Voltage Control ****** Voltage Types Normal Current ----------------------------------------------------------------------------- >>> CPU Load-Line Calibration [Auto] CPU Vcore 1.23750V [Auto] x Dynamic Vcore(DVID) +0.00000V [Auto] QPI/Vtt Voltage 1.100V [Auto] >>> MCH/ICH PCH Core 1.050V [Auto] CPU PLL 1.800V [Auto] >>> DRAM DRAM Voltage 1.500V [Auto] DRAM Termination 0.750V [Auto] ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults >>> CPU Load-Line Calibration Enables or disables Load-Line Calibration. Enabling this feature adjusts Vdroop, keeping the CPU voltage more constant under light and heavy CPU load. Disabled sets the CPU voltage following Intel specifications. (Default: Auto) Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU. CPU Vcore The default is Auto. Dynamic Vcore(DVID) The default is Auto. QPI/Vtt Voltage The default is Auto. >>> MCH/ICH PCH Core The default is Auto. CPU PLL The default is Auto. >>> DRAM DRAM...