o- tRD Phasel Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. o- tRD Phase2 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. o- tRD Phase3 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. BIOS Setup o- Trd2rd(Different Rank) Options are: Auto (default), 1-15. o- Twr2wr(Different Rank) Options are: Auto (default), 1-15. o- Twr2rd(Different Rank) Options are: Auto (default), 1-15. o- Trd2wr(Same/Diff Rank) Options are: Auto (default), 1-15. o- DIMM1 Clock Skew Control Options are: Auto (default), +800ps~-700ps. o- DIMM2 Clock Skew Control Options are: Auto (default), +800ps~-700ps. >> о» о» о» >>> о- >>> о- Ctrl Driving Pull-Up Level Options are: Auto (default), +8~-7. Clk Driving Pull-Up Level Options are: Auto (default), +8~-7. Data Driving Pull-Down Level Options are: Auto (default), +8~-7. Cmd Driving Pull-Down Level Options are: Auto (default), +8~-7. Ctrl Driving Pull-Down Level Options are: Auto (default), +8~-7. Clk Driving Pull-Down Level Options are: Auto (default), +8~-7. *** Mother Board Voltage Control ........ CPU CPU Vcore The default is Auto. CPU Termination The default is Auto. CPU Reference The default is Auto. MCH/ICH MCH Core The default is Auto. DRAM DRAM Voltage The default is Auto. - 43 - BIOS Setup 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Standard CMOS Features Date (mm:dd:yy) Tue, Mar 10 2009 Item Help Time (hh:mm:ss) 22:31:24 Menu Levels ► IDE Channel 0 Master [None] ► IDE Channel 0 Slave [None] ► IDE Channel 2 Master [None] ► IDE Channel 2 Slave [None] ► IDE Channel 3 Master [None] ► IDE Channel 3 Slave [None] Drive A [1.44M, 3.5"] Floppy 3 Mode Support [Disabled] Halt On [All, But Keyboard] Base Memory 640K Extended Memory 510M Total Memory 512M Ti^^: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults o- Date Sets the system date. The date format is week (read-only), month, date and year. Select the desired field and use the up arrow or down arrow key to set the date. o- Time Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time. o- IDE Channel 0 Master/Slave IDE HDD Auto-Detection Press to autodetect the parameters of the IDE/SATA device on this channel. IDE Channel 0, 1 Master/Slave Configure your IDE/SATA devices by using one of the three methods below: • Auto Lets BIOS automatically detect IDE/SATA devices during the POST. (Default) • None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. • Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large. o- IDE Channel 2, 3 Master/Slave IDE Auto-Detection Press to autodetect the parameters of the IDE/SATA device on this channel. Extended IDE Drive Configure your IDE/SATA devices by using one of the two methods below: • Auto Lets BIOS automatically detect IDE/SATA devices during the POST. (Default) • None If no IDE/SATA devices are used, set this item to None so the system will skipthe detection of the device during the POST for faster system startup. Access Mode Sets the hard drive access mode. Options are: Auto (default), Large. GA-EG41M-US2H Motherboard - 44 - The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Approximate capacity of the currently installed hard drive. Number of cylinders. Number of heads. Write precompensation cylinder. Landing zone. Number of sectors. Capacity Cylinder Head Precomp Landing Zone Sector Drive A Allows you to selects the type of floppy disk drive installed in your system. If you do not install a floppy disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25", 720K/3.5", 1.44M/3.5", 2.88M/3.5". Floppy 3 Mode Support Allows you to specify whether the installed floppy disk drive is 3-mode floppy disk drive, a Japanese standard floppy disk drive. Options are: Disabled (defau...
