It allows you to restrict access to the system and BIOS Setup. A supervisor password allows you to make changes in BIOS Setup. ■ Set User Password Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup. A user password only allows you to view the BIOS settings but not to make changes. ■ Save & Exit Setup Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing can also carry out this task.) ■ Exit Without Saving Abandon all changes and the previous settings remain in effect. Pressing to the confirmation message will exit BIOS Setup. (Pressing can also carry out this task.) BIOS Setup - 34 - 2-3 I MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2009 Award Software MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster [Auto] ▲ Item Help CPU Clock Ratio (Note) [12X] Menu Level ► Fine CPU Clock Ratio (Note) [+0.0] CPU Frequency 2.40 GHz ( 200x12) ******** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control [Disabled] x CPU Host Frequency (Mhz) 200 PCI Express Frequency (Mhz) [Auto] ******** DRAM Performance Control ******** Performance Enhance [Standard] System Memory Multiplier (SPD) [Auto] Memory Frequency (Mhz) 667 667 DRAM Timing Selectable (SPD) [Auto] >>>>> Standard Timing Control x CAS Latency Time 5 Auto x tRCD 5 Auto ▼ HIgf; Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F 7: Optimized Defaults CMOS Setup Utility-Copynght (C) 1984-2009 Award Software MB Intelligent Tweaker(M.I.T.) x tRP 5 Auto x tRAS 15 Auto >>>>> Advanced Timing Control ► Advanced Timing Control [Press En ******** Mother Board Voltage Control ******** Voltage Types Normal Current Item Help Menu Level ► >>> CPU CPU Vcore CPU Termination CPU Reference >>> DRAM DRAM Voltage : Move Enter: Select F5: Previous Values 1.32500 V [Auto] 1.200 V [Auto] +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults A Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) [Auto] [Auto] (Note) This item appears only if you install a CPU that supports this feature. - 35 - BIOS Setup ■s* Robust Graphics Booster Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo. o- CPU Clock Ratio (Note) Allows you to alter the clock ratio for the installed CPU. The item is present only if a CPU with unlocked clock ratio is installed. o- Fine CPU Clock Ratio (Note) Allows you to increase clock ratio by 0.5 for the installed CPU. The item is present only if a CPU with unlocked clock ratio is installed. o- CPU Frequency Displays the current operating CPU frequency. ******** Clock Chip Control ******** >>>>> Standard Clock Control o- CPU Host Clock Control Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled) o’ CPU Host Frequency (Mhz) Allows you to manually set the CPU host frequency. The adjustable range is from 100 MHz to 1200 MHz. This item is configurable only if the CPU Host Clock Control option is enabled. For an 800 MHz FSB CPU, set this item to 200 MHz. For a 1066 MHz FSB CPU, set this item to 266 MHz. For a 1333 MHz FSB CPU, set this item to 333 MHz. Important: It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. PCI Express Frequency (Mhz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 90 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) ******** DRAM Performance Control ******** Performance Enhance Allows the system to operate at three different performance levels. ►► Standard Lets the system operate at its basic performance level. (Default) ►►Turbo Lets the system operate at its good performance level. ►► Extreme Lets the system operate at its best performance level. o- System Memory Multiplier (S...
