Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Insert a blank formatted floppy disk into the floppy disk drive. Step 2: Go to My Computer and right-click the CD-ROM icon (This procedure assumes Drive D) and select Open. Then you will see folders and files contained in the driver CD. Double-click the BootDrv folder icon and select MENU.exe (refer to Fig.1). (Note) Fig.1 Fig.2 Step 3: A MS-DOS prompt screen will appear. Information on all chipsets should be listed on the screen (Refer to Fig.2), please select the proper chipset model. Your system will then automatically zip and transfer this driver file to the floppy disk. After you complete the steps, boot from the Windows CD to install the RAID drivers. When install Windows 2000 or Windows XP from HDDs in serial ATA controller, press F6 as Win2000 or XP boots up, then supply serial ATA controller driver by this floppy disk. Follow on-screen instructions to complete installation. (Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed under Windows once for that hard drive. After that, the driver will not have to be installed.) Note: In the menu list, Intel Application Accelerator 4.0 is Intel ICH6R chipset. -77 -Appendix English4-1-5 2 / 4 / 5.1 / 7.1 Channel Audio Function Introduction After installation of the audio driver, you'll find an icon in the system area. Double click the icon to select the function. 4-1-5 2 / 4 / 5.1 / 7.1 Channel Audio Function Introduction After installation of the audio driver, you'll find an icon in the system area. Double click the icon to select the function. If the icon can not be found, go to the control panel from the system menu and double click the C-Media CPL icon. Open "CMI Audio Config" and then go to "Information" tab. Make sure "Show the audio configuration icon in the system tray" is checked. There are 5 kinds of output mode: Earphone Output Mode, 2 / 4 / 5.1 / 7.1 Channel Output Mode. Earphone Output Mode --Only earphone output is configured on the system. 2 Channel Output Mode --Front speakers are configured on the system. 4 Channel Output Mode --Front speakers and surround speakers are configured on the system. 5.1 Channel Output Mode -- Front speakers, surround speakers and center/subwoofer speakers are configured on the system. 7.1 Channel Output Mode -- Front speakers, surround speakers, center/subwoofer speakers and back surround speakers are configured on the system. The output mode is decided by the sequence with high priority in the front: back surround speakers, center/ subwoofer speakers, surround speakers, front speakers and earphone. (e.g. if back surround speakers are configured, then the system will be in 7.1 channel output mode no matter what other output devices are configured.) GA-8I915P Dual Graphic Motherboard - 78 2 Channel Audio Setup: We recommend that you use speakers with amplifier to acquire the best sound effect if the stereo output is applied. English STEP 1: Connect the stereo speakers or earphone to "Line Out". Line Out STEP 2: After installation of the audio driver, you'll find an icon in the system area. Double click the icon to select the function. STEP 3: Click "C-Media 3D Audio Configuration" and then select "Main Setting". The current audio mode is displayed in "Audio System Status". "Smart Jack" would auto-detect the speaker type you connect and gives you the functions to manually modify the speaker settings. The function to manually modify speaker settings. The function to adjust speaker volume. -79 -Appendix English 4 Channel Audio Setup STEP 1 : Connect the front speaker to "Front Speaker Out" and Front Speaker Out the surround speaker to "Surround speaker out". Surround speaker out STEP 2: After installation of the audio driver, you'll find an icon in the system area. Double click the icon to select the function. STEP 3: Click "C-Media 3D Audio Configuration" and then select "Main Setting". The current audio mode is display in "Audio System Status". "Smart Jack" would auto-detect the speaker type you connect and gives you the functions to manually modify speaker the settings. The function to manually modify speaker setting. The function to adjust speaker volume. GA-8I915P Dual Graphic Motherboard - 80 English 5.1 Channel Audio Setup STEP 1 : Front Speaker Out Connect the front speaker to "Front Speaker Out", the surround speaker to "Surround speaker out", and the Center/Subwoofer center/subwoofer speaker to "Center/Subwoofer Speaker Out Speaker Out". Surround speaker out STEP 2: After installation of the audio driver, you find an icon in the system area. Double click the icon to select the function. STEP 3: Click "C-Media 3D Audio Configuration" and then select "Main Setting". The current audio mode is display in "Audio System Status". "Smart Jack" would auto-detect the speaker type you connect and gives you the functions to manually modify speaker the settings. The function to manually modify speaker setting. The function to adjust speaker volume. -81 -Appendix English 7.1 Chann...