to 3 No-Execute Memory Protect (Note) CPU Enhanced Halt (C1E) (Note) CPU Thermal Monitor 2(TM2) (Note) On-Chip Frame Buffer Size [Press Enter] [Floppy] [Hard Disk] [CDROM] [Setup] [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [8MB] Item Help Menu Level• Select Hard Disk Boot Device Priority ........: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults " # " System will detect automatically and show up when you install the Intel® Pentium® 4 processor with HT Technology. Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press to exit this menu. First / Second / Third Boot Device Floppy Select your boot device priority by Floppy. LS120 Select your boot device priority by LS120. Hard Disk Select your boot device priority by Hard Disk. CDROM Select your boot device priority by CDROM. ZIP Select your boot device priority by ZIP. USB-FDD Select your boot device priority by USB-FDD. USB-ZIP Select your boot device priority by USB-ZIP. USB-CDROM Select your boot device priority by USB-CDROM. USB-HDD Select your boot device priority by USB-HDD. LAN Select your boot device priority by LAN. Disabled Disable this function. (Note) This item will show up when you install a processor which supports this function. GA-8I915GL-MFK Motherboard - 34 English Password Check Setup The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) System The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. CPU Hyper-Threading Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value) Disabled Disables CPU Hyper Threading. Limit CPUID Max. to 3 Enabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disabled Disables CPUID Limit for windows XP. (Default value) No-Execute Memory Protect(Note) Enabled Enables No-Execute Memory Protect function. Disabled Disables No-Execute Memory Protect function. (Default value) CPU Enhanced Halt (C1E) (Note) Enabled Enables CPU Enhanced Halt (C1E) function. Disabled Disables CPU Enhanced Halt (C1E) function. (Default value) CPU Thermal Monitor 2 (TM2) (Note) Enabled Enable CPU Thermal Monitor 2 (TM2) function. Disabled Disable CPU Thermal Monitor 2 (TM2) function. (Default value) On-Chip Frame Buffer Size 1MB Set On-chip frame buffer size to 1MB. 4MB Set On-chip frame buffer size to 4MB. 8MB Set On-chip frame buffer size to 8MB. (Default value) 16MB Set On-chip frame buffer size to 16MB. 32MB Set On-chip frame buffer size to 32MB. (Note) This item will show up when you install a processor which supports this function. -35 - BIOS Setup English 2-3 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip SATA Mode x PATA IDE Set to SATA Port 0/2 Set to SATA Port 1/3 Set to USB Controller USB 2.0 Controller USB Keyboard Support USB Mouse Support Azalia Codec Front Panel Type Onboard H/W 1394 Onboard H/W LAN Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select x UR2 Duplex Mode Onboard Parallel Port ........: Move Enter: Select F5: Previous Values [Enabled] [Auto] Ch.1 Master/Slave Ch.2 Master/Slave Ch.3 Master/Slave [Enabled] [Enabled] [Disabled] [Disabled] [Auto] [HD Audio] [Enabled] [Enabled] [Disabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] [Half] [378/IRQ7] +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Item Help Menu Level• CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals ........: Move Enter: Select F5: Previous Values Parallel Port Mode x ECP Mode Use DMA +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults [SPP] 3 ESC: Exit F1: General Help F7: Optimized Defaults Item Help Menu Level• On-Chip Primary PCI IDE Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. GA-8I915GL-MFK Motherboard - 36 English On-Chip SATA Mode Disabled Disable this function. Auto BIOS will auto detect. (Default value) Combined Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on the motherboard; 2 for SATA and the other for PATA IDE. Enhanced Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6 HDDs to use. Non-Combined Set On-Chip SATA mode to Non-Combined, SATA will be simulated to PATA mode. PATA IDE Set to Ch.1 Master/Slave Set PATA IDE to Ch. 1 Master/Slave. (Default value) Ch.0 Master/Slave Set PATA IDE to Ch. 0 Master/Slave. SATA Port 0/2 Set to This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to". If PATA IDE were set to Ch. 1 Master/Slave, this function will aut...
