Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Motherboard - GA-8I915GV-M (16.33 mb)
Motherboard - GA-8I915GV-M (10.57 mb)
Facilidade de uso
8. If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. Instances of Non-Warranty 1. Damage due to natural disaster, accident or human cause. 2. Damage as a result of violating the conditions recommended in the user manual. 3. Damage due to improper installation. 4. Damage due to use of uncertified components. 5. Damage due to use exceeding the permitted parameters. 6. Product determined to be an unofficial Gigabyte product. -9 - Hardware Installation English 1-2 Feature Summary CPU • Supports the latest Intel® Pentium® 4 LGA775 CPU • Supports 800/533MHz FSB • L2 cache varies with CPU Chipset • Northbridge: Intel® 915GV Express chipset • Southbridge: Intel® ICH6 Memory • 4 DDR DIMM memory slots (supports up to 4GB memory) (Note 1) • Supports dual channel DDR400/333/266 DIMM • Supports 2.5V DDR DIMM Slots • 1 PCI Express x 1 slot • 2 PCI slots IDE Connections • 1 IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of 2 IIDE devices FDD Connections • 1 FDD connection, allows connection of 2 FDD devices Onboard SATA • 4 Serial ATA connections Peripherals • 1 parallel port supporting Normal/EPP/ECP mode • 1 VGA port, onboard COMA/COMB connection • 8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable) • 3 IEEE1394 ports (requires cable) • 1 front audio connector • 1 IR connector • 1 PS/2 keyboard port • 1 PS/2 mouse port Onboard LAN • Onboard Realtek 8110S chip (10/100/1000 Mbit) • Onboard Realtek 8100C chip (10/100 Mbit) • 1 RJ 45 port Onboard Audio • ALC880 CODEC • High Definition Audio • Supports 2 / 4 / 6 / 8 channel audio • Supports Line In ; Line Out (Front Speaker Out) ; MIC ; Surround Speaker Out (Rear Speaker Out) ; Center/Subwoofer Speaker Out ;Side Speaker Out connection • Supports SPDIF In/Out connection • CD In (Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount. For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system startup. Only for GA-8I915GV-MF. Only for GA-8I915GVM. GA-8I915GV-MF/GA-8I915GVM Motherboard - 10 I/O Control • IT8712 Hardware Monitor • System voltage detection • CPU temperature detection • CPU / System fan speed detection • CPU warning temperature • CPU / System fan failure warning • CPU smart fan control BIOS • • Use of licensed AWARD BIOS Supports Q-Flash Additional Features • Supports @BIOS • Supports EasyTune 5 (only supports Hardware Monitor function) Overclocking • Over Clock via BIOS (DDR) Form Factor • Micro ATX form factor; 24.4 cm x 24.4 cm English -11 -Hardware Installation English Fig. 3 Fig. 4 Notice the small gold Once the CPU is colored triangle properly inserted, located on the edge of please replace the the CPU socket. load plate and Align the push the metal lever indented corner of the back into its original CPU with the triangle and gently insert the CPU position. into position. (Grasping the CPU firmly between your thumb and forefinger, carefully place it into the socket in a straight and downwards motion. Avoid twisting or bending motions that might cause damage to the CPU during installation.) 1-3 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and heatsink. 4. Please make sure the heatsink is installed on the CPU prior to system use, otherwise overheating and permanent damage of the CPU may occur. 5. Please set the CPU host frequency in accordance with the processor specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards for the peripherals. If you wish to set the frequency beyond the proper specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc. HT functionality requirement content : Enabling the functionality of Hyper-Threading Technology for your computer system requires all of the following platform components: - CPU: An Intel® Pentium 4 Processor with HT Technology - Chipset: An Intel® Chipset that supports HT Technology - BIOS: A BIOS that supports HT Technology and has it enabled - OS: An operation system that has optimizations for HT Technology 1-3-1 Installation of the CPU Metal Lever Fig. 1 Fig. 2 Gently lift the metal Remove the plastic lever located on the covering on the CPU CPU socket to the socket. upright position. GA-8I915GV-MF/GA-8I915GVM Motherboard - 12 1-3-2 Installation of the Heatsink English Fig.1 Please apply an even layer of heatsink paste on the...
Este manual também é adequado para os modelos :Motherboard - GA-8I915GV-MF (7.13 mb)