Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
3 Set MODEM use IRQ to 3. 4 Set MODEM use IRQ to 4. (Default Value) 5 Set MODEM use IRQ to 5. 7 Set MODEM use IRQ to 7. • ModemRingOn/WakeOnLan Disabled Disable Modem Ring On / Wake On LAN function. Enabled Enable Modem Ring On / Wake On LAN function. (Default Value) BIOS Setup • •••• PME Event Wake up Disabled Disable PME event wake up function. Enabled Enable PME event wake up function. (Default Value) • •••• Resume by RTC Alarm You can set “Resume by RTC Alarm ” item to enabled and key in Data/time to power on system. Disabled Disable this function. (Default Value) Enabled Enable alarm function to POWER ON system. If Resume by RTC Alarm is Enabled. RTC Alarm Date : Every Day,1~31 RTC Alarm Hour: 0~23 RTC Alarm Minute : 0~59 RTC Alarm Second : 0~59 • •••• Display Activity (In APM mode, Monitor display activity function from suspend) Ignore Ignore Display Activity. (Default Value) Monitor Monitor Display Activity. • •••• IRQ( 3,4,5,7,9,10,11,13,14,15) (In APM mode, Monitor IRQ3,4,5,7,9,10,11,13,14,15 event from suspend) Ignore Ignore IRQ3,4,5,7,9,10,11,13,14,15 event. Monitor Monitor IRQ3,4,5,7,9,10,11,13,14,15 event. 60 6PMM Series Motherboard PnP/PCI Configurations AMIBIOS SETUP –PNP/PCI CONFIGURATION SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Reset Configuration Data :No VGA Boot From :PCI AGP Frame Buffer Size :8MB IRQ3 :PCI/PnP IRQ4 :PCI/PnP IRQ5 :PCI/PnP IRQ7 :PCI/PnP IRQ9 :PCI/PnP IRQ10 :PCI/PnP IRQ11 :PCI/PnP IRQ14 :PCI/PnP IRQ15 :PCI/PnP ESC : Quit ^v<>: Select Item F1 : Help PU/PD/+/-: Modify F5 : Old Values (Shift)F2 :Color F6 : Load BIOS Defaults F7 : Load Setup Defaults Figure 6: PnP/PCI Configuration • •••• Reset Configuration Data To advise BIOS clear PnP configuration data for usable value. Yes Reset PnP configuration data in order to re-initialize ESCD for PnP device. No Disabled this function. (Default Value) • •••• VGA Boot From AGP Set VGA Boot from On Board AGP. PCI Set VGA Boot from Add-on PCI. (Default Value) • •••• AGP Frame Buffer Size (on board AGP shared memory size) 8MB Set AGP Frame Buffer Size to 8MB. (Default Value) 16MB Set AGP Frame Buffer Size to 16 MB. 32MB Set AGP Frame Buffer Size to 32 MB. • •••• IRQ ( 3,4,5,7,9, 10,11,14,15), assigned to ( “ISA ” or “PCI/PnP” ) ISA The resource is used by Legacy ISA device. PCI / PnP The resource is used by PCI/ PnP device. 61 BIOS Setup Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP CTION LOAD BIOS DEFAUL LOAD SETUP DEFAULTS USER PASSWORD PNP/PCI CONFIGURA Load BIOS Defaults (Y/N)? N EXIT WITHOUT SAVING ESC : Quit ^v>< : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Load BIOS Default except Standard CMOS Setup Figure 7: Load BIOS Defaults • •••• Load BIOS Defaults BIOS defaults contain the most appropriate system parameter values of to configure the system to achieve maximum stability. 62 6PMM Series Motherboard Load Setup Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.23 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP ECTION LOAD BIOS DEFAULTS SUPERVISOR PASSWORD POWER MANAGEM URA Load SETUP Defaults (Y/N)? NPNP/PCI CONFIG SAVE & EXIT SETUP LOAD SETUP DEFAULTS EXIT WITHOUT SAVING ESC : Quit ^v>< : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load BIOS Defaults F7: Load Setup Defaults F10: Save & Exit Load Setup Default except Standard CMOS Setup Figure 8: Load Setup Defaults • •••• Load Setup Defaults Load Setup defaults contain the most appropriate system parameter values to configure the system to achieve maximum performance. 63 BIOS Setup 64 Integrated Peripherals Figure 9: Integrated Peripherals • OnBoard IDE Disabled Disable onboard IDE. Both Set onboard IDE to Both. (Default Value). Primary Set onboard IDE to Primary. Secondary Set onboard IDE to Secondary. • OnBoard FDC Disabled Disable onboard FDC.. Enabled Enable onboard FDC. (Default Value) • OnBoard Serial Port 1 Auto BIOS will automatically setup the port 1 address. (Default Value). 3F8/COM1 Enable onboard Serial port 1 and address is 3F8. 2F8/COM2 Enable onboard Serial port 1 and address is 2F8. 3E8/COM3 Enable onboard Serial port 1 and address is 3E8. 2E8/COM4 Enable onboard Serial port 1 and address is 2E8. Disabled Disable onboard Serial port 1. AMIBIOS SETUP –INTEGRATED PERIPHERAL ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard IDE :Both MPU-401 I/O Address :330h-333h OnBoard FDC :Enabled Game Port(200h-207h) :Enabled OnBoard Serial Port 1 :Auto OnBoard Serial Port 2 :Auto Serial Port 2 Mode :Normal Duplex Mode :N/A OnBoard Parallel Port :Auto Parallel Port Mode :ECP Parallel Port DMA :Auto Parallel Port IRQ ...