Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
After completing the settings, click Set for the settings to take effect and then click Exit to quit. ••Device Scan Time (sec.): Set the length of time Auto Green scans your Bluetooth cell phone key, ranging from 5 to 30 seconds in 5-second increment. Auto Green searches for the key based on the length of time you set. ••Rescan Times: Set how many times Auto Green will rescan your Bluetooth cell phone key if it does not detect it, ranging from 2 to 5 times. Auto Green will keep rescanning according to the times you set. When the times limit is reached and your Bluetooth cell phone key is still not detected, the system will enter the selected energy saving mode. ••Turn off HD: Set when to turn off the hard drive. If the system inactivity time exceeds the specified time limit, the hard drive will be turned off. Selecting a system energy saving mode: Depending on your needs, select a system power saving mode on the Auto Green main menu and click Save to save the settings. Button Description Standby Enters Power on Suspend mode Suspend Enters Suspend to RAM mode Disable Disables this function The Bluetooth dongle included in the motherboard package(Note 2) allows you to wake up the system from Suspend to RAM mode without the need to press the power button first. (Note 1) If your cell phone has been configured as the Auto Green key, you'll not be able to use it to connect to other Bluetooth device(s) when Auto Green is enabled. (Note 2) Whether the Bluetooth dongle is included depends on the motherboard models. Before installing the Bluetooth dongle, be sure to turn off other Bluetooth receiver on your computer. Unique Features 4-6 EZ Setup EZ Setup consists of the EZ Smart Response (Note), EZ Rapid Start, and EZ Smart Connect utilities. The EZ Setup application frees you from complicated installation and configuration process and allows you to use the application with ease. Installing EZ Setup After inserting the GIGABYTE motherboard driver disk, click Express Install to install all motherboard drivers. After completion, go to the New Program menu and click Install on the right of the EZ Setup application to install it. Launching EZ Setup Step 1: While in the operating system, go to Start\All Programs\GIGABYTE and select EZ Setup. (Figure 1) Step 2: Select the utilities you wish to install and click Setup to begin the installation. (Figure 2) Figure 2 Figure 1 ••For detailed configurations, please refer to Intel's documentation. ••During the installation process, the system will configure the BIOS settings and install required drivers. The system may restart automatically a few times. (Note) Not supported on the Intel B75 Chipset. Unique Features 4-6-1 Installing EZ Smart Response A. System Requirements 1. An Intel Chipset-based motherboard supporting this feature (Note 1) 2. An Intel Core series processor 3. RAID enabled for the Intel SATA controllers in BIOS Setup 4. A conventional SATA disk and an SSD (Note 2) 5. Windows 7 with SP1 (Note 3) If you have installed the operating system before configuring the Smart Response Technology, all original data on the hard disk will be lost once you enable RAID mode. It is recommended that you back up the hard disk before enabling the Smart Response Technology. B. Installation Step 1: Select EZ Smart Response and click Setup. (Figure 1) Step 2: A warning message indicating that the system will be forced to RAID mode will appear. (Note 4) Select Yes and the system will restart. (Figure 2) Step 3: After the system restarts, it will install the Intel Raid Storage Technology driver automatically. The system will restart again after the driver installation. Figure 2 Figure 1 C. Disabling EZ Smart Response To disable EZ Smart Response, select Disable EZ Smart Response and click Setup. (Note 1) Not supported on the Intel B75 Chipset. (Note 2) The SSD works as a cache of the hard disk. The maximum cache memory size is 64 GB. If you use an SSD larger than 64 GB, the space beyond 64 GB can still be used for storing your data. (Note 3) The operating system must be installed to the SATA disk. (Note 4) Regardless of the BIOS settings, be it IDE or AHCI mode, the system will be forced to RAID mode. Unique Features 4-6-2 Installing EZ Rapid Start A. System Requirements 1. Intel Rapid Start Technology enabled in BIOS Setup 2. Windows 7 with SP1 3. An SSD with size larger than the total system memory 4. AHCI/RAID mode supported (please note if the SSD has been assigned as a member of a RAID array, it cannot be used to set up Intel Rapid Start store partition); IDE mode not supported B. Installation Step 1: Select EZ Rapid Start and click Setup. (Figure 1) Step 2: A warning message indicating the system will be forced to RAID mode will appear. (Note) Select Yes and the system will restart and automatically enable Intel Rapid Start Technology in the BIOS Setup. (Figure 2) Step 3: After the system restarts, it will install the Intel Raid Start Technology Manager driver automatically. The s...