Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
••Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container. ••Before unplugging the power supply cable from the motherboard, make sure the power supply has been turned off. ••Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard. ••Before using the product, please verify that all cables and power connectors of your hardware components are connected. ••To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components. ••Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing. ••Do not place the computer system on an uneven surface. ••Do not place the computer system in a high-temperature environment. ••Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user. ••If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. 1-2 Product Specifications CPU ..Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/ Intel® Celeron® processors in the LGA1155 package (Go to GIGABYTE's website for the latest CPU support list.) ..L3 cache varies with CPU Chipset ..Intel® B75 Express Chipset Memory ..2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. ..Dual channel memory architecture ..Support for DDR3 1600/1333/1066 MHz memory modules * To support DDR3 1600 MHz, you must install an Intel® 22nm (Ivy Bridge) CPU. ..Support for non-ECC memory modules ..Support for Extreme Memory Profile (XMP) memory modules * To support XMP memory, you must install an Intel® 22nm (Ivy Bridge) CPU. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard Graphics ..Integrated Graphics Processor: - 1 x D-Sub port, supporting a maximum resolution of 1920x1200 - Maximum shared memory of 1 GB Audio ..Realtek® ALC887 codec ..High Definition Audio ..2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN ..Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ..1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot conforms to PCI Express 3.0 standard.) * Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility. ..1 x PCI Express x1 slot (The PCI Express x1 slot conforms to PCI Express 2.0 standard.) ..1 x PCI slot Storage Interface ..Chipset: - 1 x SATA 6Gb/s connector (SATA3 0) - 5 x SATA 3Gb/s connectors (SATA2 1~5) USB ..Chipset: - 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) - 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) Internal Connectors ..1 x 24-pin ATX main power connector ..1 x 4-pin ATX 12V power connector ..1 x SATA 6Gb/s connector ..5 x SATA 3Gb/s connectors ..1 x CPU fan header ..1 x system fan header Internal Connectors ..1 x front panel header ..1 x front panel audio header ..1 x USB 3.0/2.0 header ..2 x USB 2.0/1.1 headers ..1 x Clear CMOS jumper ..1 x chassis intrusion header Back Panel Connectors ..1 x PS/2 mouse port ..1 x PS/2 Keyboard port ..1 x parallel port ..1 x serial port ..1 x D-Sub port ..2 x USB 3.0/2.0 ports ..2 x USB 2.0/1.1 ports ..1 x RJ-45 port ..3 x audio jacks (Line In, Line Out, Mic In) I/O Controller ..iTE® I/O Controller Chip Hardware Monitor ..System voltage detection ..CPU/System temperature detection ..CPU/System fan speed detection ..CPU/System fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. BIOS ..1 x 32 Mbit flash ..Use of licensed AMI UEFI BIOS ..PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features ..Support for @BIOS ..Support for Q-Flash ..Support for Xpress Install ..Support for EasyTune * Available functions in EasyTune may differ by motherboard model. ..Support for Xpress Recovery2 ..Support for ON/OFF Charge Bundled Software ..Norton® Internet Security (OEM version) ..Intel® Rapid Start Technology ..Intel® Smart Connect Technology Operating System ..Support for Windows 8.1/8/7 Form Factor ..Micro ATX Form Factor; 22.6cm x 17.4cm * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. * Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s) for the software listed in the "Unique Features" and "B...