Use only 3 wire cord type (3 prong plug) marked for outdoor use. RESETTESTWARNINGGFCI Cord Adapter Figure 1 - GFCI Options Test and Reset Buttons PLUG ADAPTER IMPORTANT: This product must be used on a grounded supply circuit. An adapter as shown in Figure 2 is available for connecting three-prong grounding type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. Grounded Outlet Box Figur

Keep this manual for future reference. TABLE OF CONTENTS Safety Information ............................................... 2 Wiring Diagram.................................................... 5 Pre-Operating Instructions .................................. 3 Safety Requirements........................................... 6 General Information............................................. 4 Cautions .............................................................. 6 Product Identification.............

If you find an obstruction, turn the product OFF and UNPLUG THE PRODUCT. Have the product serviced by a qualified individual. 4. Check for tripped thermal protector. Motor and heating element do not operate. Wait 10 minutes for product to cool. Push reset button. See Thermal Limit Switch below. THERMAL LIMIT SWITCH If product is used in temperatures below 75° F (28.9° C), the limit switch should not require resetting unless there is a malfunction. If a malfunction does occur, have the product se

Umbrella must be supported by a table. 31. Do not use or install umbrella into product at temperatures below freezing. A damaged product could result in the risk of fire, electric shock and injury to persons. 32. Do not use this at any elevation above floor level. Do not place on a table. 33. Locate product so “ON” light can be easily seen 10 ft (3.05 m) around and 5 ft (1.52 m) above. 34. If a table cloth is used on the table above the product, secure it to prevent movement due to wind. 35. Do