Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
Supported File Formats MP3 : MPEG 1/2/2.5 Layer 3, ~320Kbps, ~48KHz, mono/stereo WMA : ~320Kbps, ~48KHz, mono/stereo WAV : ~48KHz, 16bit, mono/stereo FM Radio Frequency Range : 87.5MHz ~ 108MHz, 76MHz ~ 108MHz (Japan Wide) Memory 2GB / 4GB / 8GB USB Interface High Speed USB 2.0 File Transfer Rate Max 35Mbps (Upload Max 40Mbps) Power Supply Built-in Rechargeable 3.7V Lithium Polymer battery(Max. 24 hours of continuous playback based on company test) Charging Time About 2 hours (either USB or Adapter) Buttons Power/Hold , PLAY, REC, FF, REW, VOL+, VOL-, MENU Display 1.8 inch 128x160 dots, 65,000 Color TFT LCD SNR 95dB (A-Weighted) Output Frequency 20Hz~20KHz Output 16 Ohm earphones : 32mW + 32mW Dimension iAUDIO U5: 41.1 x 85.1 x 9.3 mm (Width x Length x Thickness) Weight iAUDIO U5: 35g (including lithium polymer battery) iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 4. Identifying the Parts Front Left Bottom Back LCD Display ..(REW) ..(FF) REC PLAY/STOP Earphone Jack -(VOL -) Reset MENU On /HOLDSwitch USB Connection Jack + (VOL +) MIC iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 5. TFT LCD Display Current Time Album Title Artist Name Song Title Repeat Shuffle Play time Sound Hold Battery Status Current Track / Total Tracks Play Mode Section Repeat Progress Bar Total Time The battery status icon indicates how much battery is left. The number of segments in the icon decreases as the battery discharges. For some batteries or rechargeable batteries, the number of segments in the battery icon may increase or decrease irregularly when the remaining charge is being measured. This is normal. When the battery runs out, the battery icon starts to blink. If this happens, the player will automatically power off after about 30 minutes. iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 6. Charging iAUDIO U5 • If your player is being used for the first time or if it has not been charged for a long time, make sure player is charged fully before using it • To charge iAUDIO U5, connect the player to a PC using a USB cable or connect to the AC provided adapter only. (a) Using an AC adapter (sold separately) i. Connect the AC adapter to an electrical outlet and the USB jack of the player ii. Once connected, the player will automatically turn on and start charging iii. Once the player is fully charged, the charge complete screen will appear as shown. - Genuine COWON AC adapter is sold separately and works for both 100V and 240V. - For your safety, use only the adapter supplied by the manufacturer. iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 (b) Using a PC connection i. Connect the supplied USB cable to the USB jack of the player and directly to your computer. The connection to an external USB hub is not supported. The player must be directly connected to the PC via a USB cable. ii. If the connection is made properly, the player will display an image showing charging status. iii. To check the charging status, run ‘Safely Remove Hardware’ wizard on your PC. Then iAUDIO U5 will display charging status on its screen. iv. Slow charging is recommended for notebooks and other devices that use battery power. See section 4.7 on changing the charging speed of iAUDIO iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 7. Windows 98 Driver Setup When using Windows 98 or 98 SE, you need to install hardware driver for the PC to recognize the player. •Windows 2000 and later versions automatically recognize the player. ¦ Installing the driver 1. Connect the player to your PC using the supplied USB cable. 2. “Add New Hardware Wizard” will appear as shown. Click “Next”. 3. Click “Search for the best driver for your device (Recommended)”, and then click “Next” iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 4.Click “Specify a location” and click “Browse” button. 5.Select “Win98” folder in the installation CD and then click “Next” button. Driv ers are also available for download from 6. Once the drivers are recognized, click “Next”. iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 7. Continue to click “Next” 8.Click the “Finish” button to complete the driver installation. The newly added drive can be seen in Device Manager or Explorer. iAUDIO U5 Introducing iAUDIO U5 Introducing iAUDIO U5 8. Connecting to PC and Transferring Files 1. Connect the player to a PC using the supplied USB cable. 3. The iAUDIO drive will appear as shown and can be accessed like a disk drive using Windows Explorer 2. When connected, the screen will show the following screen. 4. Launch Windows File Explorer or JetAudio. 5. You can copy any files including MP 3files to and from “iAUDIO” Drive 6. To disconnect the player from the PC, first make sure that file transfers are complete and then, single-click on icon on the windows tray. 7. Click on the following pop-up message when it appears 8. When “Safely Remove Hardware” message appears, and the TFT LCD displays a battery you may disconnect the USB cable. -The iAUDIO ...