Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Connect to a plug socket with protective earth contact and fused with a 10 A-L automatic device or a 10 A slow-blowing fuse. 10500mm 50mm i Installing and Connecting Build-in model To install the appliance in a kitchen cabinet, use the appropriate mounting frame. Note the relevant instructions for installation and connection. When building in to a high cabinet, you may use the lift- door. Note the relevant information for installation and connection given in the operation instructions of the lift door. ! Attention ! Never operate the microwave oven with the lift door closed. Such operation would damage your appliance and invalidate the guarantee. Connect to a plug socket with protective earth contact and fused with a 10 A-L automatic device or 10 A slow-blowing fuse. When the oven is installed, there must be a possibility of disconnecting it from mains with a contact break of at least 3 mm on all poles. A suitable size of LS-switch, or a melting or fly-out fuse, are suitable contact-breakers. This appliance complies with the following EC Directives : 73/23/EEC of 10.02.1973 - Low voltage directive 89/336/EEC of 03.05.1089 (incl. Amendment Directive 92/31/EEC) - EMC (Electromagnetic Compatibility) Directive. Product Description The appliance PROGRAMME START/QUICK LOSCHEN LEISTUNG TUROFFNER DREHTELLER AUS 8888ZEIT/GEWICHT 1000 W A F B E C D A Control panel B Turntable C Door seal D Door latch and catch E Viewing window F Interior lighting Product description The control panel Display for time of day, cooking time, function mode, Multi-function button SET to display the selected microwave osting and cooking with signal to select microwave power. to select the cooking time or the weight using automatic automatic pro- for defros- ting and cooking. to cancel set- tings or interrupt a program- to start the selec- ted function and to switch on Button for switching the turntable off with signal light. Button for opening door. 88881000 W C g A C D E F G H B I 81 t Accessories The turntable and turntable support should be installed as shown in the diagram. Take care to ensure the turntable support is properly in place. The turntable may turn clockwise or counterclockwise during operation. Do not try to rotate the roller ring manually, as you could damage the drive system. Special accessories May be ordered either through your retailer or AEG Service Center. Rack (E-Nr. 661 917 375) Make sure to place the browning dish on the rack to avoid damaging the turntable. Before using the appliance + Setting the clock Example: 12:15 hrs 1. Plug the appliance into the mains. The display starts to flash «0 000 00:0 000 00» and then «A AAE EEG GG». The dots between the digits blink rapidly. 88881000 W C g 00:00 2. Press the multi-function button SET beneath the display (top left side). The dots between the digits blink faster. 3. While keeping the multi-function button SET pressed, set the time of day with the rotary knob 1). Release the button as soon as the time of day is displayed. The dots between the digits blink slowly. The appliance is now ready for use. 12:15 i 1) The rotary button can be turned clockwise (to increase) or coun terclockwise (to decrease). The time of day can be corrected at any moment by pressing the multi-function button SET and simultaneously turning the rotary button. + «At a glance» operating instructions Action Comments 1.Press door open button. The door opens. 2. Place food in the cooking space. 3. Shut the door. The door will click audibly when it is properly shut. If the door is not shut properly, the appliance will not function. 4. Select according to the instructions The order in which you programme given on the following pages. functions has no consequence 1). Turn the time buttom clockwise to increase or counterclockwise to decrease time 2) 5. If required : switch off the turntable. When the turntable has been switched off, the appropriate signal lamp lights up. The turntable should only be turned off when using rectangular ovenware that is larger than the turntable and is in danger of jamming. 6. Press the START-button. The appliance starts. The display shows the selected cooking time, counting down backwards in seconds. (The signal light representing the chosen function lights up.) 7.End of cooking sequence. The end of the cooking sequence is indicated by a triple audible tone. The appliance and the interior light wilI switch off. The display area once again shows the time of day. i 1) If the oven is not started within 4 minutes, the settings are automatically cancelled ; time of day reappears in the display. 2) If the maximum cooking time setting « 6 660 00: ::0 000 00 » is surpassed during the setting, the display shows « 0 000 00 :0 000 00 » ‘At a glance...’ + Action : Comments . Open the door by pressing the door e.g. for stirring. The appliance and interior lighting switch off. In the display, the two dots between the digits flash. The selected settings remain. The remaining time counts d...