Log:
Assessments - 4, GPA: 4 ( )

Instruções de Operação Broan, Modelo EVOLUTION QP236WW

Fabricante : Broan
Arquivo Tamanho: 2.14 mb
Arquivo Nome :
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


as the blower motor will shut down intermittantly. 5. Your hood motor has a thermal overload which will automatically shut off the motor if it becomes overheated. The motor will restart when it cools down. If the motor continues to shut off and restart, have the hood serviced. 6. The top of the hood MUST NOT BE LESS than 24” and at a maximum of 30” above cooktop for best capture of cooking impurities. 7. This hood is not intended to be used as a shelf. 8. Please read specification label on product for further information and requirements. NOTE I If hood is to be installed non-ducted: Purchase a set of (2) non-ducted filters for 30” wide hoods (Model BPPF30) & 36” wide hoods (Model BPPF36) or a set of (3) non-ducted filters for 42” wide hoods (Model BPPF42) from your local distributor or retailer and attach them to the aluminum mesh filters. ^Registeryour^product^onlineat: Installer: Leave this manual with the homeowner. Homeowner: Cleaning, Maintenance and Operating instructions on page 2. BR6ÄN MODELS QP230BC • QP230BL • QP230SS • QP230WW QP236BC • QP236BL • QP236SS • QP236WW QP242BC • QP242BL • QP242SS • QP242WW Page 2 CONTENTS INCLUDED WITH THE HOOD: (1) 3%” X 10” DAMPER/DUCT CONNECTOR GREASE FILTERS (2 - FOR 30” & 36” HOODS) 3 - FOR 42” HOODS) > (1) 7” ROUND (4) Sgf DUCT HALOGEN CONNECTOR BULBS (3) WIRE NUTS (9) ^ #8 X 1/4” DUCT CONNECTOR SCREWS (1) PARTS BAG CONTAINING: (1) BULB SUCTION CUP TOOL (1) NON-DUCT DIVERTER (5) #10 X 5/8” RD. HD. MOUNTING SCREWS (2) #8 X 5/16” MACHINE SCREWS & (2) #8 WASHERS FOR NON-DUCT DIVERTER CLEANING & MAINTENANCE For performance, appearance, and health reasons, clean filter, fan and grease-laden surfaces. Use only a clean cloth and mild detergent solution on stainless and painted surfaces. Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergents, or as a result of local water conditions - but this will not affect filter performance. This discoloration is not covered by the warranty. Clean the non-duct recirculating filter surfaces frequently with a damp cloth and a mild detergent. DO NOT immerse filters in water or put in dishwasher. The special “Clean Sense” feature indicates when the filter is to be replaced. The blue and yellow strips will blend to green when it is time to change the filter. The “Clean Sense” feature works best when facing toward the cooking surface. Change the non-duct recirculating filters every 6 months. For replacement non-duct recirculating filters - purchase S99010353 or Model BPPF30 for 30 wide hoods” S99010354 or Model BPPF36 for 36” wide hoods, or S99010360 or Model BPPF42 for 42” wide hoods. The motor is permanently lubricated and never needs oiling. If the motor bearings make excessive or unusual noise, replace the motor with the exact service motor. The impeller should also be replaced. Use 120 V, 50 W, shielded halogen bulbs - MR16 with ...

Este manual também é adequado para os modelos :
Fornos de microondas - EVOLUTION QP236BL (2.14 mb)
Fornos de microondas - EVOLUTION QP236SS (2.14 mb)
Fornos de microondas - EVOLUTION QP242BC (2.14 mb)
Fornos de microondas - EVOLUTION QP242BL (2.14 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias