Assessments - 3, GPA: 4.3 ( )

Fabricante : Bosch Arquivo Tamanho: 2.34 mb Arquivo Nome : Língua de Ensino:

For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 290 lbs (132 kg). 281/2" 293/4" (724mm) 24" (610mm) 603/4" (1543mm) 93/4" (248mm) 237/8" (606mm) 22" (559mm) (755mm) 595/8" (1514mm) 2713/16" (706mm) 613/8" (1559mm) Combo Oven with Microwave and Warming Drawer 30” It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 310 lbs (141 kg). English 8 293/4" 281/2" (724mm) 24" (610mm) 40" (1016mm) 93/4" (248mm) Combo Oven with Warming Drawer 30” It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 290 lbs (132 kg). 237/8" (606mm) 22" (559mm) (755mm) 381/8" (968mm) 2713/16" (706mm) 407/16" (1027mm) English 9 30” Under-the-counter-Units 36" (915mm) 20" (508mm) 281/4" (718mm) 161/2" (419mm)24" (610mm) 4" (102mm) 281/2" (724mm) 237/8" (606mm) 22" (559mm) 291/16" (738mm) 293/4" (755mm) 27" (686mm) 2713/16" (706mm) min. 33/4" (95mm) English 10 English 11 Removing Packaging • Cut foil wrap in the area of corner posts. • Remove foil completely. • Remove top cardboard. • Remove all top and side cardboard and Styrofoam braces. • Place oven in front of cabinets where it is to be installed. • Unscrew unit from Left and Right Brackets as show in “Left and Right Packaging Bracket Removal.” Left and Right Packaging Bracket Removal Note: Bracket remains in packaging base. Unit should stay in packaging base plate until ready to be lifted into cabinet cutout. For Convection Microwave Combination Units Remove 2 rear support Convection Microwave Shipping Brackets prior to installation as shown in “Convection Microwave Shipping Bracket Removal.” Convection Microwave Shipping Bracket Removal (for Convection Microwave Combination Units Only) Preparing Oven Place oven in front of cabinets where it is to be installed. Rest it on a jack or other sturdy support so that it is in line with the cabinet cutout. Installation Electrical Installation All model ovens on the front cover are dual rated, designed to be connected to either 208/240V AC, 60 Hz, 4 wire, single-phase power supply. Model Circuit Required 208V, 60 Hz 240V, 60 Hz HBN33, HBL33 25 AMP 30 AMP HBN34, HBL34, HBN54, HBL54 HBL85 30 AMP 30 AMP HBN35, HBL35, HBN56, HBL56, HBL57, HBL8650, HBL8750 40 or 50 Amp circuit. Refer to local electrical codes for de-rating requirements. The electrical supply should be a 4-wire single-phase AC. Install a suitable conduit box (not furnished). Important: Local Codes may vary, installation, electrical connections and grounding ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :