Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Bosch, Modelo HBCKBB21/45

Fabricante : Bosch
Arquivo Tamanho: 607.08 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


Use the @ or Abutton to change the basic setting. 3. Confirm by pressing the 0 button. The next basic setting appears in the display. You can scroll through all levels using the 0 button and change the setting using the @ or A button. 4. To finish, press and hold the 0 button for approx. 4seconds. All basic settings are applied. You may change the basic settings at any time. Automatic switch-off If you do not change the settings on your appliance for several hours, automatic switch- off is activated. The oven stops heating. The point at which this occurs depends on the temperature or grill setting that has been set. Automatic switch-off is activated A signal sounds. F8 appears in the display. The oven stops heating. Turn the function selector to the off position. The oven switches off. Overriding automatic switch- off So that automatic switch- off is not activated when it is not wanted, you can set a time period. The oven will heat until this period has expired. Care and cleaning With careful care and cleaning your microwave oven will retain its looks and remain good order. We will explain here how you should care for and clean your appliance correctly. : Risk of electric shock! Penetrating moisture may cause an electric shock. Do not use any high-pressure cleaners or steam cleaners. : Risk of burns! The appliance becomes very hot. Never touch the interior surfaces of the cooking compartment or the heating elements. Always allow the appliance to cool down. Keep children at a safe distance. Notes ¦ Slight differences in colour on the front of the appliance are caused by the use of different materials, such as glass, plastic and metal. ¦ Shadows on the door panel which look like streaks, are caused by reflections made by the oven light. ¦ Enamel is baked on at very high temperatures. This can cause some slight colour variations. This is normal and does not affect their function. The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. This will not impair the anti-corrosion protection. ¦ Unpleasant odours, e. g. after fish has been prepared, can be removed very easily. Add a few drops of lemon juice to a cup of water. Place a spoon into the container as well, to prevent delayed boiling. Heat the water for 1 to 2 minutes at maximum microwave power. Cleaning agents To ensure that the different surfaces are not damaged by using the wrong cleaning agent, observe the information in the table. Do not use ¦ sharp or abrasive cleaning agents, ¦ metal or glass scrapers to clean the glass in the appliance door, ¦ metal or glass scrapers to clean the door seal, ¦ hard scouring pads and sponges, ¦ cleaning agents with high concentrations of alcohol. Wash new sponge cloths thoroughly before use. Area Cleaning agents Appliance front Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaners or metal or glass scrapers for cleaning. Stainless steel Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin (e. g. egg white) immediately. Corrosion can form under such residues. Special stainless steel cleaning agents can be obtained from the after-sales service or from specialist shops. Oven Hot soapy water or a vinegar solution: Clean with a dish cloth and dry with a soft cloth. If oven is very dirty: use oven cleaner, but only when oven is cold. It is best to use a stainless- steel sponge. Glass cover for the Hot soapy water: oven light Clean with a dish cloth. Control panel/ outer Glass cleaner: door panel Wipe dry immediately using a soft cloth. Do not use a glass scraper. Inner door glass Glass cleaner: Wipe dry with a soft cloth. Do not use a glass scraper. Seal Hot soapy water: Clean with a dish cloth, do not scour. Do not use a metal or glass scraper for cleaning. Accessories Hot soapy water: Soak and clean with a dish cloth or a brush. Cleaning the self- cleaning surfaces in the cooking compartment The back wall and ceiling are coated with self-cleaning enamel. They clean themselves while the oven is in operation. Sometimes, larger splashes of food may not disappear until the oven has been operated several times. Notes ¦ Never treat the self-cleaning surfaces with oven cleaner. If oven cleaner accidentally gets onto the back wall or ceiling, remove it immediately with a sponge and plenty of water. ¦ Never use abrasive cleaning agents. You will scratch or destroy the highly porous coating. ¦ Never treat the self-cleaning surfaces with a scouring pad. ¦ Light discolouration of the enamel does not affect self- cleaning. Cleaning the cooking compartment floor and side walls Use a dish cloth and hot soapy water or a vinegar solution. If there are heavy deposits of dirt, use a stainless steel scouring pad or oven cleaner. Only use in a cold oven. Cleaning the glass cover The glass cover can be removed from the oven ceiling for cleaning. : Risk of burns! Do not remove the panels immediately...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias