Assessments - 0, GPA: 0 ( )

Fabricante : Bosch Arquivo Tamanho: 896.02 kb Arquivo Nome : Língua de Ensino:

por este dispositivo também tem outras instruções :

Fornos de microondas - HBC86K723B/01 (929.4 kb)

Switch to the cooking time by turning the rotary selector. 3. Press theX button to change the line. 4. Turn the rotary selector to set the cooking time. ( ( 5. Press the 0 button. The time-setting options menu closes. 6. If operation has not yet been started, Press the n button. ) You can see the cooking time counting down in the status bar. The cooking time has elapsed A signal sounds. Operation has finished. The status bar shows 00:00:00. You can cancel the signal before it has finished sounding by pressing the 0 button. Cancelling the cooking time Press the 0 button to open the menu. Use the rotary selector to switch to the cooking time, press the Xbutton and set the cooking time to 00:00 by turning the rotary selector. Press the 0 button to close the menu. Changing the cooking time Press the 0 button to open the menu. Use the rotary selector to switch to the cooking time, press the Xbutton and change the cooking time by turning the rotary selector. Press the 0 button to close the menu. Setting a later end time Please remember that easily spoiled foods must not be allowed to remain in the cooking compartment for too long. Example: you put the food in the cooking compartment at 9: 30 am. It takes 45 minutes to cook and will be ready at 10:15, but you would like it to be ready at 12:45 instead. Change the end time from 10:15 to 12:45. The oven goes into standby. Cooking starts at 12:00 and finishes at 12:45. In some programmes, it is not possible to move the end time. Setting the end time Prerequisite: The selected operation has not already begun and a cooking time has already been set. The time-setting options menu 0 is open. 1. Use the Ybutton to move to the top line and the rotary selector to move to the end. The time when the operation will be finished is displayed. 2. Press the X button. 3. Set a later end time by turning the rotary selector. *+ ( *+ ( 4. Press the 0 button to close the time-setting options menu. 5. Confirm by pressing the n button. ,,, The setting is adopted. The oven is in standby mode 0.. . and starts operation at the correct time. The cooking time has elapsed A signal sounds. Operation has finished. The status bar shows 00:00:00. You can cancel the signal before it has finished sounding by pressing the 0 button. Changing the end time This is possible, provided the oven is in standby mode 0... . To do so, press the 0 button to open the menu. Use the rotary selector to change to end time. Press the Xbutton and use the rotary selector to correct the end time. Press the 0 button to close the menu. Cancelling the end time This is possible, provided the oven is in standby mode 0... . Use the rotary selector to change to end time. Press the X button and turn the rotary selector anti-clockwise until the display goes out. Press the 0 button to close the menu. Setting the clock The oven must be switched off before you can set or change the clock. Following a power cut The " Set clock" heading appears in the display following a power cut. 1. Press the Xbutton and turn the rotary selector to set the current time. 2. Press the 0 button. The time is applied. Changing the clock Example: changing from summer to winter time. 1. Press the 0 button. The time-setting options menu appears. 2. Switch to the clock by turning the rotary selector. 3. Press the X button and turn the rotary selector to change the time. 4. Press the 0 button. The time-setting options menu closes. The time is changed. Hiding the clock The current time appears in the display when the oven is switched off. You can hide the clock. For more information, refer to the Basic settings section. Memory Memory gives you the option to store your own settings and call them up again at the press of a button. There are six memory locations available. The memory function is useful for recipes which you prepare particularly frequently. Storing settings in the memory 1. Set the required operating mode. Do not start. 2. Press and release the f button and use the rotary selector to select one of the six memory locations. 3. Press and hold the fbutton until "Memory saved" is displayed. The setting is saved and can be started at any time. Reallocating a memory location Make the settings, select the memory location and save the new settings using the f button. The old settings are overwritten. Starting the memory You can start the saved settings at any time. 1. Press and release the f button and use the rotary selector to select the memory location. The stored settings are displayed. If “Memory location empty” appears, this means that there are no settings stored as yet in this memory location. 2. Press the n button. The memory function starts. Changing the memory location Once operation has started, you can no longer change the memory location. Changing the settings This can be done at any time. The setting you originally saved appears the next time you start the memory. Sabbath mode When this setting is used, th...

Baixe o seu

Para fazer o download, introduza 2 dígitos :