Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
To disconnect, turn control to OFF, then remove plug from wall outlet. 13. Do not use appliance for other than intended purpose. SAVE THESE INSTRUCTIONS Other Consumer Safety Information This appliance is intended for household use only. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. WARNING: To reduce risk of pinching or crushing fingers, always unplug mixer before inserting or removing beaters. BEFORE FIRST USE: Wash bowl and beaters in hot, soapy water. Rinse and dry. NOTICE: Never place mixing bowl in oven, microwave oven, or a hot cooking surface. Mixing bowl is not intended to be used at high temperatures and should never be used as cookware, ovenware, or bakeware. Wattage/Peak Power Information The marked rating of the hand mixer is Peak power is an average of the maximum determined by Underwriter’s Laboratory as wattage a hand mixer may consume during the maximum stabilized power consumption initial operation at high speed. of the hand mixer at high speed under a loaded condition. 2 840163500 ENv03.qxd 4/30/07 1:43 PM Page 3 Parts and Features Speed Control (ON/OFF) and Eject Button Beaters Bowl Turntable Shift and Stir™ Bowl Lever Burst Mixer Stand Mixer Release Button Mixer Tilt Button How to Assemble Stand The stand mixer is very convenient for most recipes. However, small amounts–like one cup of cream–may not contact the beaters in the stand mixer mode. In these cases we recommend using as a hand mixer. NOTE: Attach mixer to stand before attaching beaters. 1. Set stand on counter. With platform level and while holding mixer as shown, place the L-shaped tab on platform into slot on bottom of mixer. Platform 2. As the mixer is lowered, gently press the back of the mixer onto the platform until it locks in position. 3. The mixer can now be used as a stand mixer. 3 840163500 ENv03.qxd 4/30/07 4:25 PM Page 4 Optional Attachments (available on select models) Before first use: wash beaters or attachments in warm, sudsy water; rinse and dry. Always unplug mixer from electrical outlet before inserting or removing attachments. This mixer comes with 1 or more of the following attachments: ATTACHMENT DESCRIPTION The flat beaters are designed for general mixing purposes. The straight wire beaters, which have no center post for ease in cleaning, are designed for mixing thick batters and cookie dough. The single whisk is perfect for whipping cream. The whisk may be inserted into either opening. The twisted wire beaters, which have no center post for ease in cleaning, are designed for mixing thick batters and cookie dough. The dough hooks can perfectly knead a one loaf bread recipe. Always use dough hooks on speed 4, 5, or 6 in hand mixer. Do not use dough hooks in stand mixer mode. To Insert Attachments NOTE: When using the mixer in the stand, always attach the mixer to the stand before inserting attachments. Flat Beaters, Straight Wire Beaters, and Whisk 1. Always make sure mixer is unplugged and speed control is set to OFF. 2. Insert a beater or attachment into an opening on the bottom of the mixer. Push until it clicks into place. Repeat with other beater or attachment. Twisted Wire Beaters and Dough Hooks 1. Always make sure mixer is unplugged and speed control is set to OFF. 4 2. Insert the wire beater or the dough hook with the Collar collar into the opening indicated by the illustration on the mixer. 3. Align tabs on the beater or dough hook with the Slot Tab slots in the opening. Push until it clicks into place. Repeat with other beater or dough hook. 840163500 ENv03.qxd 4/30/07 1:43 PM Page 5 Optional Features (available on select models) Burst Press and hold down the button for additional power at any speed. NOTE: Never use Burst for more than two minutes at a time or motor may overheat. Bowl Rest™ This feature can be used on most large NOTES: mixing bowls. Use the Bowl Rest while adding ingredients or checking a recipe. To use, TURN MIXER OFF, then set the mixer on the edge of the bowl. Mixer Release Button Use this feature to lock the mixer in the “down” position when using on the stand. Shift and Stir™ Bowl Lever Use the lever to move the turntable. This allows you to position the beaters near the edge of the bowl or in the center for better mixing performance. Bowl Lever • Never use Bowl Rest when mixer is on. • Do not use Bowl Rest on small (11.2 quart) mixing bowls or plastic mixing bowls. Using Your Mixer 1. Always make sure mixer is unplugged and OFF before inserting beaters, using as a hand mixer or assembling on the stand. 2. Plug mixer into electrical outlet. 3. Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary. 4. If using as a stand mixer do...